Heat Flow in the Casting – Mould System for Moulds with Gypsum and Cement Binder
Author:
Cholewa M.,Kozakiewicz Ł.
Abstract
Abstract
The production of thin-walled castings with wall thickness in the range of 1.5 to 3 mm and below requires the development of insulation moulding sands and/or core materials. The test has been taken to develop these kind of materials. The study included a description of their thermophysical properties. Authors described problems related to the heat flow in the casting-mould system, i.e. mathematically described the main dependence of heat give-up during crystallization of the casting. The influence of the content of polyglicol on the thermophysical properties of the mould with gypsum and cement binder was examined. Using the ATD method determined were the increments ΔT1 and ΔT2 describing the temperature changes in the mould during crystallization of hypoeutectic alloy of AlSi6 and the temperature difference between casting material and mould during the crystallization. In the considered range of technological parameters a description of the heat flow kinetics was given.
Publisher
Walter de Gruyter GmbH
Subject
Metals and Alloys,Industrial and Manufacturing Engineering
Reference2 articles.
1. Heat waves;Joseph;Rev Mod Phys,1989
2. On the theory of crystal growth : The fundamental rate equation of Crystal Growth;Jackson;Journal,1969