Affiliation:
1. Experimental Forest , National Taiwan University , Taipei , Taiwan
2. Department of Forestry , National Chung-Hsing University , Taichung , Taiwan
3. Agricultural Biotechnology Research Center, Academia Sinica , Taipei , Taiwan , Phone: + 886-4-22840345, ext 138
Abstract
Abstract
The properties of oriented bamboo scrimber boards (OBSB) have been investigated at three density levels (0.8, 0.9, and 1.0 g cm3), while the boards were made from moso bamboo (Phyllostachys pubescens) grown in Taiwan (T-OBSB) and China (C-OBSB). A non-destructive technique (NDT), ultrasonic-wave velocity (Vu
) measurements were applied and the dynamic modulus of elasticity (MOEdyn) was calculated. Moreover, static modulus of elasticity (MOE), modulus of rupture (MOR), profile density distribution, internal bond strength (IB), springback (SB), and dimensional stability were determined based on traditional methods. Positive linear relationships between density and Vu
, MOEdyn, MOE and MOR were observed, no matter if the measurements were done parallel (//) or perpendicular (⊥) to the fiber direction of the OBSBs. Moreover, Vu
(//), MOEdyn,u(//), MOE(//), and MOR(//) were higher than Vu
(⊥), MOEdyn,u(⊥), MOE(⊥) and MOR(⊥). C-OBSB had slightly lower Vu
(//),
Vu
(⊥), MOEdyn,u(//) and DMOEu(⊥) values than T-OBSB. T-OBSB had higher MOE(//), MOE(⊥) and MOR(//) than C-OBSB, but less MOR(⊥). The profile density distribution of high-density T-OBSB showed singnificant data scattering. The profile density distribution of C-OBSB was homogeneous at all density levels. IB and SB data are directly proportional to density, but water absorption, thickness swelling and volumetric swelling are inversely proportional to density. T-OBSB has better bonding and strength properties, and dimensional stability than C-OBSB.
Reference36 articles.
1. American Society for Testing and Methods. (1999) ASTM D1037, Evaluating properties of wood-based fiber and particle panel materials.
2. Chung, M.J., Wang, S.Y. (2017) Effects of peeling and steam-heating treatment on basic properties of two types of bamboo culms (Phyllostachys makinoi and Phyllostachys pubescens). J. Wood Sci. 1–10.
3. Hon, N.S. Wood and cellulosic chemistry. Marcel Dekker, Inc., New York, 2001.
4. Huang, P., Pickering, S.G., Chang, W.-S., Ansell, M.P., Chew, J.Y.M., Shea, A. (2017) Thermal diffusivity measurement of Phyllostachys edulis (Moso bamboo) by the flash method. Holzforschung 71:349–354.
5. Khalil, H.P.S.A., Bhata, I.U.H., Jawaid, M., Zaidon, A., Hermawan, D., Hadi, Y.S. (2012) Bamboo fibre reinforced biocomposites: a review. Mater. Des. 42:353–368.
Cited by
33 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献