Wood modification with trimethoxyphenylsilane via supercritical carbon dioxide for enhanced weathering resistance-Reference-Cited by-同舟云学术

Wood modification with trimethoxyphenylsilane via supercritical carbon dioxide for enhanced weathering resistance

Published:2023-12-14 Issue:1 Volume:78 Page:56-61
ISSN:0018-3830
Container-title:Holzforschung
language:en
Short-container-title:

Author:

Triquet Juliette¹^ORCID,Renard Olivier¹,Piluso Pierre¹^ORCID

Affiliation:

1. Université Grenoble Alpes, CEA, LITEN, DTNM , F-38000 Grenoble , France

Abstract

Abstract This research focuses on increasing wood resistance against UV degradation using trimethoxyphenylsilane as modifying agent and supercritical CO2 as a green solvent and reaction medium. Trimethoxyphenylsilane was successfully grafted on European spruce (Picea abies, H. Karst) and was characterized by SEM-EDX and UV–vis reflectance. SEM-EDX showed the presence of silicium inside the wood cell wall. Increased wood moisture content showed positive effect on weight gain of trimethoxyphenylsilane after treatment. UV resistance of treated wood was evaluated by following the color change during artificial weathering. Modified samples showed improved weathering resistance compared to unmodified wood with a ΔE value around 5 after 260 h. Processing and modifying wood using supercritical CO2 is a promising route to increase wood performances and increase its use as a building material.

Funder

Région Auvergne-Rhône-Alpes

Publisher

Walter de Gruyter GmbH

Subject

Biomaterials

Link

https://www.degruyter.com/document/doi/10.1515/hf-2023-0089/pdf

Reference44 articles.

1. Blanchet, P. and Pepin, S. (2021). Trends in chemical wood surface improvements and modifications: a review of the last five vears. Coatings 11: 1514, https://doi.org/10.3390/coatings11121514.

2. Cogulet, A., Blanchet, P., and Landry, V. (2016). Wood degradation under UV irradiation: a lignin characterization. J. Photochem. Photobiol. B Biol. 158: 184–191, https://doi.org/10.1016/j.jphotobiol.2016.02.030.

3. Dawson, B.S.W., Singh, A.P., Kroese, H.W., Schwitzer, M.A., Gallagher, S., Riddiough, S.J., and Wu, S. (2008a). Enhancing exterior performance of clear coatings through photostabilization of wooden surfaces. Part 1: treatment and characterization. J. Coat. Technol. Res. 5: 193–206, https://doi.org/10.1007/s11998-008-9089-5.

4. Dawson, B.S.W., Singh, A.P., Kroese, H.W., Schwitzer, M.A., Gallagher, S., Riddiough, S.J., and Wu, S. (2008b). Enhancing exterior performance of clear coatings through photostabilization of wood. Part 2: coating and weathering performance. J. Coat. Technol. Res. 5: 207–219, https://doi.org/10.1007/s11998-008-9090-z.

5. De Vetter, L., Cnudde, V., Masschaele, B., Jacobs, P.J.S., and Van Acker, J. (2006). Detection and distribution analysis of organosilicon compounds in wood by means of SEM-EDX and micro-CT. Mater. Charact. 56: 39–48, https://doi.org/10.1016/j.matchar.2005.09.007.