Enhancing RF energy harvesting in smart cities with two port MIMO-UWB antenna design using machine learning algorithms-Reference-Cited by-同舟云学术

Enhancing RF energy harvesting in smart cities with two port MIMO-UWB antenna design using machine learning algorithms

Published:2024-06-19 Issue:9-10 Volume:78 Page:413-431
ISSN:0016-1136
Container-title:Frequenz
language:en
Short-container-title:

Author:

Nannepaga Bujjibabu¹^ORCID,Varadarajan Souri¹

Affiliation:

1. Department of ECE , 209164 SVUCE, Sri Venkateswara University , Tirupati , Andhra Pradesh , India

Abstract

Abstract This work presents the two port ultra-wide band MIMO antenna with novel isolation structure and dual band RF Rectifier for 3.3 GHz and 4.65 GHz frequencies for RF energy harvesting applications. The anticipated antenna is systematically examined within the ultra-wideband (UWB) range from 3.1 GHz to 10.6 GHz design frequency with four different steps: Antenna 1, Antenna 2, Antenna 3 and Antenna 4 (optimal design) are chosen for comprehensive study. A unique isolation structure was developed between two identical elements separated by 10 mm, resulting in an enhanced isolation of −23.5 dB at 3.15 GHz, −27 dB at 5.8 GHz, −28 dB at 9.26 GHz and greater than −34 dB at 7.5 GHz. The suggested antenna resonates at UWB band and have fractional bandwidth of 118.66 % and a peak gain of 4.1 dB at 3.15 GHz, 3.68 dB at 5.8 GHz, 6.4 dB at 7.5 GHz and 3.2 dB at 9.26 GHz has been obtained. Radiation efficiencies of 92.5 %, 95 %, 90 % and 84.5 % at 3.15 GHz, 5.8 GHz, 7.5 GHz and 9.26 GHz were obtained respectively. The recommended MIMO performance is simulated using HFSS in terms of ECC, DG, MEG and CCL. The results adhere to specified requirements and confirmed by experimentation. An HFSS simulated dataset of reflection coefficient is used as input for the various ML algorithms namely, Support Vector Machine (SVM), Ensemble, k-nearest neighbors’ algorithm (KNN) and Gaussian Process Regression (GPR) models are trained with 80 % of the data and testing with 20 % of the data. The test results are compared and corresponding performance values of MAE, RMSE, MSE & R 2 are 0.00029, 0.00197, 3.87e−6 and 1.0 validation results and corresponding test results are 0.00031, 0.00229, 5.20e−6 and 0.999. Finally, the proposed dual band rectifier with a shorted stub is tested for harvesting applications at 3.3 GHz and 4.65 GHz frequency and it attained RF to DC conversion efficiencies of 69 % and 55.40 % respectively.

Publisher

Walter de Gruyter GmbH

Link

https://www.degruyter.com/document/doi/10.1515/freq-2023-0386/pdf

Reference36 articles.

1. O. Kasar, M. Kahriman, and M. A. Gozel, “Application of ultrawide band RF energy harvesting by using multi section Wilkinson power combiner,” Int. J. RF Microw. Computer-Aided Eng., vol. 29, no. 1, p. e21600, 2019. https://doi.org/10.1002/mmce.21600.

2. Z. Liu, Z. Zhong, and Y.-X. Guo, “Enhanced dual-band ambient RF energy harvesting with ultra-wide power range,” IEEE Microw. Wireless Compon. Lett., vol. 25, no. 9, pp. 630–632, 2015, https://doi.org/10.1109/LMWC.2015.2451397.

3. K. N. Patil and A. D. Jadhav, “Review on power conversion efficiency improvement strategies in RF energy harvesting,” in 2022 IEEE Wireless Antenna and Microwave Symposium (WAMS), 2022, pp. 1–6.

4. S.-Y. Kim, H. Abbasizadeh, B. S. Rikan, S. J. Oh, B. G. Jang, Y.-J. Park, et al., “A -20 to 30 dBm input power range wireless power system with a MPPT-based reconfigurable 48 % efficient RF energy harvester and 82 % efficient A4WP wireless power receiver with open-loop delay compensation,” IEEE Trans. Power Electron., vol. 34, no. 7, pp. 6803–6817, 2019. https://doi.org/10.1109/TPEL.2018.2872563.

5. C. R. Valenta and G. D. Durgin, “Harvesting wireless power: survey of energy-harvester conversion efficiency in far-field, wireless power transfer systems,” IEEE Microw. Mag., vol. 15, no. 4, pp. 108–120, 2014, https://doi.org/10.1109/MMM.2014.2309499.