Calcium phosphate bonded wood and fiber composite panels: production and optimization of panel properties

Abstract

AbstractThe development of phosphate bonded composites with properties comparable with those of current Portland cement bonded products has been investigated. More precisely, the focus of the study was the optimization of calcium phosphate cements in combination with wood processing residues slash pine (Pinus elliottiiEngelm.) planer shavings, Black wattle (Acacia mearnsiiDe Wild.) residues, Blue gum (Eucalyptus globulusLabill.) residues, hemp (Cannabis SativaL.) hurds and dried crushed sugarcane bagasse (Saccharum officinarumL.) as well as pulp mill sludge and waste paper. A central composite design (CCD) for the response surface methodology (RSM) was applied for selection of the proper parameters. Mechanical tests were conducted on the composite products and the effect of the processing variables was evaluated based on the Pareto analysis of variance. The density of the wood-based panels ranged from 0.68 to 1.21 g cm−3, that of the agricultural fibers from 0.59 to 1.15 g cm−3and that of the paper pulp panels from 0.81 to 1.21 g cm−3. The modulus of elasticity (MOE) data of the panels ranged from 1.63 to 4.92 MPa for wood, from 0.37 to 3.28 MPa for agricultural fibers and from 0.65 to 3.87 MPa for paper-pulp-based fibers. The physical properties of the composite products met the requirements for Portland-cement-bonded particleboards (EN 634-2, 2007).