Effect of Glass-Fabrics and High-Melting Powder Fillers on Thermal Protective Properties of Thermosetting Laminates-Reference-Cited by-同舟云学术

Effect of Glass-Fabrics and High-Melting Powder Fillers on Thermal Protective Properties of Thermosetting Laminates

Published:2018-06-01 Issue:2 Volume:18 Page:49-58
ISSN:2083-4799
Container-title:Advances in Materials Science
language:en
Short-container-title:

Author:

Kucharczyk W.¹,Żurowski W.¹,Gumiński R.¹,Przybyłek P.²,Komorek A.²

Affiliation:

1. Kazimierz Pulaski University of Technology and Humanities in Radom , Faculty of Mechanical Engineering , Stasieckiego Street 54 B1, 26-600 Radom , Poland

2. Polish Air Force Academy, Faculty of Aviation , Dywizjonu 303 Street, No 12, 08-521 Dęblin , Poland

Abstract

Abstract The present work investigates the ablative and thermal properties of phenol formaldehyde glass-fabrics laminates filled with mixtures of corundum Al2O3 and carbon C powders. The laminates specimens of dimensions 10x25x35 mm were treated with hot combustion gases having a temperature of more than 2800ºC. The carbonization of the thermosetting matrix was observed. Statistical methods for planning experiments were used, and the effect of components on the average rate of ablation, the maximum back side temperature of specimen and the average mass waste under intensive heat flow after 30 s of treatment with hot combustion gases was established. The best thermal protective properties were exhibited by the laminate containing 30% matrix, 25% fibre glass-fabric reinforcement, 9% corundum, and 36% carbon powder.

Publisher

Walter de Gruyter GmbH

Reference30 articles.

1. 1. Soutis C.: Fibre reinforced composites in aircraft construction. Progress in Aerospace Sciences, (2005) 143-151.

2. 2. Butler BD, Winter M, Panerai F, Martin A, Bailey SC, Stackpoole M, Denehy PM, Splinter S.: Characterization of candidate materials for remote recession measurements of ablative heat shield materials, 54th AIAA Aerospace Sciences Meeting, San Diego, California, USA, 2016. http://dx.doi.org/10.2514/6.2016-1516

3. 3. NIST NCSTAR 1.: Final report on the Collapse of the World Trade Center. U.S. Government Printing Office, Washington, 2005. Retrieved Jun 12, 2006, from http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909236

4. 4. Ono K, Otsuka T. Fire design requirement for various tunnel. Authors’ presentation of 32nd ITA – World Tunnel Congress, Seoul, Republic of Korea. Retrieved Jun 23, 2006, from www.ita2006.com.

5. 5. Haack, A. (2004). Latest achievements and perspectives in tunnel safety. Tunneling Underground Space Technology, 19 (204) 305. http://dx.doi.org/10.1016/j.tust.2004.01.007.