High thermal stability and high-performance efficiency capability of light sources–based rate equation models in optical fiber transmission systems-Reference-Cited by-同舟云学术

High thermal stability and high-performance efficiency capability of light sources–based rate equation models in optical fiber transmission systems

Published:2024-06-07 Issue: Volume: Page:
ISSN:0173-4911
Container-title:Journal of Optical Communications
language:en
Short-container-title:

Author:

Prabu Ramachandran Thandaiah¹,Arulmozhi Arumugam Krishnan²,Vijay Sreeja³,Vijayan Thulasi Bai⁴,Sivaraman Deepa⁵,Arulraj Merline⁶,Mahrous Alaa Hosny⁷

Affiliation:

1. Department of ECE, Saveetha School of Engineering , Saveetha Institute of Medical and Technical Sciences, SIMATS, Saveetha University , Chennai , Tamil Nadu , India

2. Department of Mathematics , 305648 R.M.K College of Engineering and Technology , Puduvoyal , Chennai , Tamil Nadu , India

3. Department of ECE , 483324 S.A. Engineering College , Chennai , Tamil Nadu , India

4. Department of ECE , KCG College of Technology , Chennai , Tamil Nadu , India

5. Department of ECE , 91572 Panimalar Engineering College , Chennai , Tamil Nadu , India

6. Department of ECE , 231565 R.M.K. Engineering College , Kavaraipettai , Chennai , Tamil Nadu , India

7. Light Institute of Engineering , Giza , Egypt

Abstract

Abstract This paper clarified the high thermal stability and high-performance efficiency capability of silicon light sources–based rate equation models in the optical fiber transmission systems. The laser diode and light emitting diode output power variations are measured with input injection current under various ambient temperature effects. The light source differential quantum efficiency is demonstrated for both LED and laser diode with different injection input current and various temperature variations. The LED/laser diode light source external efficiency is clarified with different injection input current and various temperature variations. The LED/laser diode light source total efficiency is measured with different injection input current and various temperature variations. As well as the laser diode and light emitting diode, threshold current variations are demonstrated clearly with input injection current under room temperature and various spectral thermal effects. The laser diode and light emitting diode power dissipation variations are measured with input injection current under room temperature and various spectral thermal effects.

Publisher

Walter de Gruyter GmbH

Link

https://www.degruyter.com/document/doi/10.1515/joc-2024-0090/pdf

Reference23 articles.

1. Jungo, MX, Erni, D, Bächtold, W. Vistas: a comprehensive system-oriented spatiotemporal vcsel model. IEEE J Sel Top Quant Electron 2003;9:939–48. https://doi.org/10.1109/jstqe.2003.818851.

2. Bienstman, P, Baets, R, Vukusic, J, Larsson, A, Noble, MJ, Brunner, M, et al.. Comparison of optical vcsel models on the simulation of oxide-confined devices. IEEE J Quant Electron 2001;37:1618–31. https://doi.org/10.1109/3.970909.

3. Beringer, J, Borer, K, Mommsen, RK, Nickerson, RB, Weidberg, AR, Monnier, E, et al.. Radiation hardness and lifetime studies of leds and vcsels for the optical readout of the atlas sct. Nucl Instrum Methods Phys Res 1999;435:375–92. https://doi.org/10.1016/s0168-9002(99)00570-7.

4. Shi, X, Qi, C, Wang, G, Hu, J. Rate equation based vcsel model and simulation. IEEE Trans Nucl Sci 2009;9:503–7. https://doi.org/10.1109/cadcg.2009.5246853.

5. Rissons, A, Mollier, JC. The vertical cavity surface emitting laser (vcsel) and electrical access contribution. J Nucl Mater 2004;329:1503–6.