Deformation detection through the realization of reference frames

Abstract

AbstractHellenic Military Geographical Service (HMGS) has established and measured various networks in Greece which constitute the geodetic infrastructure of the country. One of them is the triangulation network consisting of about 26.000 pillars all over Greece. Classical geodetic measurements that held by the Hellenic Military Geographic Service (HMGS) through the years have been used after adjustment for the state reference frame which materializes the current Hellenic Geodetic Reference System of 1987 (HGRS87). The aforementioned Reference System (RS) is a static one and is in use since 1990. Through the years especially in the era of satellite navigation systems many Global Navigation Satellite System (GNSS) networks have been established. The latest such network materialized by HMGS is ongoing and covers until now more than the 2/3 of the country. It is referenced by International GNSS Service (IGS) permanent stations and consists a local densification IGS08 Reference Frame. Firstly, this gives the opportunity to calculate transformation parameters between the two systems and a statistical analysis of the residuals leads to intermediate conclusions. After that and in conjunction with existing past transformations, tectonic deformations and their directions are concluded. Moreover past GPS observations on the same pillars in compare to the newer ones give also a sense of tectonic displacements. Greece is one of the most tectonically active countries in Europe and the adoption of a modern kinematic or semi-kinematic geodetic datum is a necessity as it should incorporate a deformation model like 3d velocities on the reference frame realization. The detection of geodynamic changes is a continuous need and should be taken into consideration at each epoch.