Author:
Zieliński A.,Dobrzański J.,Purzyńska H.,Sikora R.,Dziuba-Kałuża M.,Kania Z.
Abstract
AbstractThis article presents the results of investigations on HR6W alloy and Sanicro 25 steel and the dissimilar welded joint made of them. The characteristic images of microstructure of the investigated materials in the as-received condition and following the creep test, observed with a scanning electron microscope (SEM), are shown. The X-ray analysis of phase composition of the existing precipitates was carried out. The method for evaluation of creep strength based on abridged creep tests carried out at a temperature higher than the design one is presented. The obtained results do not deviate from the values of creep strength determined in long-term creep tests. The maximum difference in creep strength of the investigated materials is ±20%, which is in compliance with the acceptable scatter band. The methodology presented can be used for verification of creep strength (life time) of the material of finished components to be operated under creep conditions.
Reference14 articles.
1. Open Access science interpretation of the life of steels for power plants;Dobrzański;Library Materials,2011
2. Degradation of microstructure and mechanical properties in martensitic cast steel after ageing
3. Modelling the strain and stress state under creep conditions in steel Materials at High;Duda;Temperatures,2016
4. Institute of Welding;Brózda;Bulletin,2004
5. Test;Zieliński;Mater
Cited by
22 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献