Effects of metallurgical factors on reticular crack formations in Nb-bearing pipeline steel

Abstract

AbstractMicroscopic morphologies of reticular cracks in Nb-bearing pipeline surfaces are shown in this work. A decarburization layer, oxidized round spots, and the distributions of residual elements are each detected to better understand the mechanisms of reticular crack formations. The results show that reticular cracks are discontinuously distributed and filled with iron oxide. The oxidized round spots near the crack sides are larger and more intensive than steel matrix, with primary chemical compositions of Fe, Mn, and Si oxides. There is no obvious enrichment of Cu, Cr, or Sn near the crack zones. The formation of reticular cracks occurs prior to both decarburization and the formation of oxidized round spots. The ferrite potential (FP) of the examined pipeline steel is 1.05, which leads to a higher relative crack susceptibility. It is concluded that reticular cracks are generated during the continuous casting solidification process due to the extension of intergranular microcracks along grain boundaries under the abnormal conditions of the continuous casting process.