The design method of the V-shaped groove piston ring

Abstract

Abstract Aiming at the problems of large leakage and high friction heat generation of the piston ring under high pressure and high speed, based on the previous research on the V-shaped groove piston ring, the research on the design method of the V-shaped groove piston ring is carried out in depth. The numerical analysis is carried out focusing on the number of V-shaped grooves and the depth of the V-shaped grooves of the piston ring. The influence law is verified and analyzed by using a high-pressure and high-speed rotating test bench. The simulation and experimental results show that the leakage of 4 grooves and 8 grooves piston ring is reduced by 14.9 and 28.5%, and the temperature is reduced by 10.9 and 4.7%; When there are 8 V-shaped grooves on the piston ring, the leakage is reduced by 28.5 and 21.7%; when the V-shaped groove depth is 0.04 and 0.08 mm, the temperature is reduced by 4.1%. However, when the V-shaped groove depth is 0.12 mm, the leakage is increased by 2.7% compared with the traditional piston ring. Appropriate groove number and groove depth can realize the coordinated design of low leakage and low friction temperature rise.