Author:
Dupleix Anna,Kusiak Andrzej,Hughes Mark,Rossi Fréderic
Abstract
Abstract
The thermal properties of wood in the green state have been determined by the transient plane source (TPS) technique. Data are presented on thermal conductivity (λ), heat capacity (C), and thermal diffusivity (κ) at moisture contents (MCs) above the fiber saturation point, which are based on measurements using the HotDisk® apparatus. Four wood species (Douglas fir, beech, birch, and spruce) were tested, and the results are compared with literature data and those obtained by the flash method. A linear relationship was found between the thermal properties λ, C, and κ on the one hand and MC on the other. Equations predicting the thermal values as a function of MC and wood anisotropy are presented. Wood C and λ increase with MC, but wet wood diffuses heat more rapidly than dry wood.
Reference40 articles.
1. Flow in University;Siau,1971
2. ISO standard ISO Thermal insulation determination of steady - state thermal resistance and related properties guarded hot plate apparatus,1991
3. Modeling of moisture diffusion and heat transfer during softening in wood densification;Jia;Int J Eng,2010
4. conductivity and diffusivity of wood;Suleiman;Thermal Wood Sci Technol,1999
5. Fundamentals of and Transfer;Incropera;Heat Mass,2011
Cited by
29 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献