Affiliation:
1. State Key Laboratory of Advanced Metallurgy , University of Science and Technology of Beijing , Beijing 100083 , PR China
2. Delong Steel , Xingtai , Hebei 054009 , PR China
Abstract
Abstract
During the operation of the CSCR activated carbon desulfurization and denitrification flue gas purification system, due to the unreasonable design of flue gas pipe diameter and the uneven distribution of activated carbon porosity, the uniformity of flue gas distribution is prone to problems, which affects flue gas removal efficiency and increases operating costs. In this article, the Fluent software was used to establish a three-dimensional numerical model of the flue gas purification system, and the flow characteristics of the flue gas were studied by continuously optimizing the structure of the system model. The effects of different pipe diameters, the accumulation method of activated carbon in the desulfurization and denitration module and the distribution of porosity on the flue gas are analyzed, and the effects on the average residence time and variance of flue gas were further analyzed. The results show that the average residence time, the variance, the dead volume fraction, and well-mixed volume decreased, while the dispersed plug volume fraction increased for a module after optimization. The average residence time and the dispersed plug volume fraction decreased. While the variance, the dead volume fraction, and well-mixed volume fraction increased for the system after optimization.
Subject
General Chemical Engineering
Reference16 articles.
1. Cao, J., B. S. Jin, W. Q. Zhong, K. Wang, M. Tao, Y. Zhang, and H. Tao. 2013. “Numerical Simulation of the Particle Flow Characteristic in Cross-Flow Moving Bed with Internals.” Journal of Mechanical Engineering 49 (10): 144–50.
2. Gao, J. X., J. Liu, Y. Zeng, S. P. Zhai, Y. M. Fu, and C. X. Xin. 2012. “Application and Analysis of Dry Activated Coke (Carbon) Process of Sintering Flue Gas Purification Technology in Iron and Steel Industry.” Sintering and Pelletizing 37 (02): 61–6, doi:https://doi.org/10.13403/j.sjqt.2012.02.017.
3. He, T. 2014. “The Study of Gas-Solid Two-phase Flowing Characteristics in the Cross Moving Bed.” Science Technology and Engineering 14 (11): 103–6+122, doi:https://doi.org/10.3969/j.issn.1671-1815.2014.11.021.
4. Kumar, A., D. Mazumdar, and S. C. Koria. 2008. “Modeling of Fluid Flow and Residence Time Distribution in a Four-Strand Tundish for Enhancing Inclusion Removal.” ISIJ International 48 (1): 38–47, https://doi.org/10.2355/isijinternational.48.38.
5. Li, Y. R., Y. T. Lin, B. Wang, S. Ding, F. Qi, and T. Y. Zhu. 2019. “Carbon Consumption of Activated Coke in the Thermal Regeneration Process for Flue Gas Desulfurization and Denitrification.” Journal of Cleaner Production 228: 1391–400, doi:https://doi.org/10.1016/j.jclepro.2019.04.225.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. Preface: Special issue of “Metallurgical Reaction Engineering”;International Journal of Chemical Reactor Engineering;2022-10-01