Affiliation:
1. State Key Laboratory of Metal Material for Marine Equipment and Application , Anshan 114009 , China
2. ANSTEEL Iron & Steel Research Institute , Anshan 114009 , China
3. Key Laboratory for Ecological Metallurgy of Multimetallic Mineral , Ministry of Education, Northeastern University , Shenyang 110819 , China
Abstract
Abstract
Based on Ansteel’s new No. 5 blast furnace (BF), the distribution rule of hot blast on the circumference of blast furnace hearth under different blast volume was studied. The results show that, the blast volume distribution rule is similar under different blast volumes, that is, there are four regions with large blast volumes at the 0°, 90°, 180° and 270° positions of the bustle pipe. Under different blast volumes, the difference of blast volume near 90° and 270° is close to 0, which has a minor effect on the uneven distribution of gas flow and circumferential asymmetry of packed bed in BF. However, the blast volume of the tuyere near the 180° is always larger than that of the tuyere near 0°, and with the increase of blast volume from 4600 to 5000 nm3/min, this difference keeps increasing, 0.69 to 0.95 nm3/min. This phenomenon will lead to an increase in the coke consumption on the 180° side, and cause a higher descending velocity of coke than that on the 0° side, this difference increases from 0.39 to 0.54 m, which could further result in the unevenness of blast volume distribution and the circumferential asymmetry of packed bed in BF. Comparing with the actual production in Ansteel, the results obtained in this work are in good agreement with the phenomenon in practical production.
Funder
the Fundamental Research Funds for the Central Universities
Subject
General Chemical Engineering
Reference16 articles.
1. Dong, X. F., A. B. Yu, J. M. Burgess, D. Pinson, S. Chew, and P. Zulli. 2009. “Modelling of Multiphase Flow in Ironmaking Blast Furnace.” Industrial & Engineering Chemistry Research 48 (1): 214–26, https://doi.org/10.1021/ie800147v.
2. Guo, J., S. Cheng, H. Zhao, H. Pan, P. Du, and Z. Teng. 2013. “A Mechanism Model for Raceway Formation and Variation in a Blast Furnace.” Metallurgical and Materials Transactions B 44 (3): 487–94, https://doi.org/10.1007/s11663-013-9833-9.
3. Ichida, M., T. Nakayama, K. Tamura, H. Shiota, K. Araki, and Y. Sugisaki. 2007. “Behavior of Fines in the Blast Furnace.” Transactions of the Iron & Steel Institute of Japan 32 (4): 505–13.
4. Ke, H. B., X. D. You, H. B. Yin, G. Q. Dong, and X. T. Yuan. 2018. “Strengthen Smelting Production Practice of Tangsteel No. 3 BF.” Energy for Metallurgical Industry 37 (5): 11–3.
5. Li, S., F. Han, J. Zhang, H. Huang, S. Zhang, and B. Gao. 2014. “Effect of Blast System on Initial Gas Flow Distribution in Blast Furnace.” Research on Iron & steel 42 (5): 1–4.