Study of Rheological Properties of Bituminous Binders in Middle and High Temperatures-Reference-Cited by-同舟云学术

Study of Rheological Properties of Bituminous Binders in Middle and High Temperatures

Published:2016-05-01 Issue:1 Volume:12 Page:13-20
ISSN:2199-6512
Container-title:Civil and Environmental Engineering
language:en
Short-container-title:

Author:

Remišová Eva¹,Zatkaliková Viera²,Schlosser František³

Affiliation:

1. Department of Highway Engineering, Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia.

2. Department of Materials Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia.

3. Department of Construction Management, Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia.

Abstract

Abstract The bitumen binders in road pavements are exposed traffic loading effect at different climatic conditions. A resistance to these stresses depends on bitumen properties as well. The paper presents rheological properties (G*, δ, ν*) determined and compared for four bituminous binders (unmodified and polymer modified bitumen) at temperature 46 – 60 (80) °C and dynamic viscosity at temperature 130 – 190 °C (Brookfield viscometer). On the basis of viscosity results it is possible to set optimal production and compaction temperatures. Elastic and viscous behavior of binder in the middle temperature is determined in rheometers. The higher value of complex modulus, the stiffer bitumen binder is able to resist deformation. The greater content of elastic components (e.g. polymer in bitumen) varies mainly elastic-viscous properties of primary bitumen.

Publisher

Walter de Gruyter GmbH

Subject

Civil and Structural Engineering,Environmental Engineering

Cited by 19 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Physical Chemistry Supports Circular Economy: Toward a Viable Use of Products from the Pyrolysis of a Refuse-Derived Fuel and Granulated Scrap Tire Rubber as Bitumen Additives;Eurasian Chemico-Technological Journal;2023-11-20

2. Synergic effects between vacuum residue and polymers for preparing high-performance bitumens;Colloids and Surfaces A: Physicochemical and Engineering Aspects;2023-11

3. How char from waste pyrolysis can improve bitumen characteristics and induce anti-aging effects;Colloids and Surfaces A: Physicochemical and Engineering Aspects;2023-11

4. Laboratory research on the effect of water foaming technology on basic properties and foamability of paving grade bitumen 50/70 and polymer modified bitumens (45/80-55, 45/80-80);PROCEEDINGS OF THE 15TH INTERNATIONAL CONFERENCE ON X-RAY MICROSCOPY – XRM2022;2023

5. Effects of water-foaming and liquid warm mix additive on the properties and chemical composition of asphalt binders in terms of short term ageing process;Construction and Building Materials;2022-07