Determination of Fatigue Life and Failure Location of Vehicle Cylindrical LPG Fuel Tanks-Reference-Cited by-同舟云学术

Determination of Fatigue Life and Failure Location of Vehicle Cylindrical LPG Fuel Tanks

Published:2016-06-01 Issue:6 Volume:53 Page:360-378
ISSN:2195-8599
Container-title:Practical Metallography
language:en
Short-container-title:

Author:

Kartal F.¹,Kişioğlu Y.²

Affiliation:

1. Kastamonu University, Engineering and Architecture Faculty, Mechanical Engineering Department , Kastamonu , Turkey

2. Kocaeli University, Faculty of Technology, Biomedical Engineering, Biomechanics , Kocaeli , Turkey

Abstract

Abstract This study addresses the determination of the fatigue life and its failure locations of the vehicle cylindrical LPG fuel tanks using both experimental and finite element analysis (FEA) methods. The experimental investigations performed as an accelerated fatigue tests are carried out using a hydraulics test unit in which the cylinders are internally pressurized by hydraulic oil. The LPG cylinders are subjected to repeated cyclic pressure varying from zero to service pressure of the tank. The FEA modeling of these tanks are developed in three dimensional (3D) using non-uniform geometrical parameters and nonlinear material properties. These models are also subjected to zero-based high cycle fatigue pressure load considering the stress life approach. The FEA modeling process is also simulated in non-homogeneous material conditions. Therefore, the fatigue life performance and failure location of the cylindrical LPG fuel tanks are predicted and compared to the experimental results.

Publisher

Walter de Gruyter GmbH

Subject

Metals and Alloys,Mechanics of Materials,Condensed Matter Physics,Electronic, Optical and Magnetic Materials

Link

https://www.degruyter.com/document/doi/10.1515/147.110391/pdf

Reference22 articles.

1. ECE-R67; The Economic Commission for Europe, 1999

2. TS 12095 EN 12805; Turkish Standard Institute, Ankara, Turkey, 2004

3. Kisioglu, Y.; Brevick, J. R.; Kinzel, G. L.: J. Press. Vess.-T ASME 123 (2001) 240–247 DOI: 10.1115/1.1357158

4. Kaptan, A.; Kisioglu, Y.: Int. J. Pres. Ves. Pip. 84 (2007) 451–459 DOI: 10.1016/j.ijpvp.2007.02.004

5. Aksoley, M. E.: Gebze High Institute Technology, MSc. Thesis, (2004)

Cited by 2 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Taşıt Silindirik LPG Tanklarının Mukavemet Performans Değerlendirmeleri;Journal of Polytechnic;2023-07-16

2. Theoretical and experimental study on sealing performance of a novel ultra-high pressure bursting disc;Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering;2020-09-16