Development of Dy3+ doped lithium magnesium borate glass system for thermoluminescence based neutron dosimetry applications

Abstract

Abstract The manuscript reports the synthesis of Dy3+ incorporated lithium magnesium borate glass by melt quenching technique. FTIR study revealed the presence of both BO3 as well as tetrahedral BO4 units through their characteristic frequencies. Photoluminescence (PL) study of unirradiated samples confirmed the presence of Dy dopant in the ‘+3’ oxidation states from the characteristic emissions at 482, 578, 666 and 716 nm corresponding to 4F9/2 → 6H15/2, 4F9/2 → 6H13/2 and 4F9/2 → 6H11/2, 4F9/2 → 6H9/2 transitions, respectively. Thermal neutron and gamma irradiated PL emission and lifetime characteristics were discussed in details based on the different defect centers. Thermal neutron irradiated TL study showed that the material has a broad and single dosimetry glow peak at about 450 K which showed high fading due to low temperature peak. TL based neutron sensitivity of LMB: Dy3+ was found to be about 37.4 times less than that of standard TLD-100 (LiF: Mg, Ti) powder. The net TL response from about 3 to 83 mSv of neutron dose was found to be linear (Adj. R2 = 0.9994) which is one of the most desirable properties for dosimetry applications. In addition, the TL trap parameters were evaluated using both deconvolution of TL glow curve and peak shape method as suggested by Chen which were found to be matching with each other.