The Influence of Features of Aluminium Alloys 2024, 6061 and 7075 on the Properties of Glare-Type Composites / Wpływ Właściwości Stopów Aluminium 2024, 6061, 7075 Na Cechy Kompozytu Typu Glare

Abstract

The above paper presents the assumptions and results of the research whose aim was to determine the influence of 2024, 6061 and 7075 aluminum alloys on the final properties of GLARE-type composites. GLARE 3 2/1 type composites, made of two layers of the epoxy prepreg, reinforced with unidirectional glass fibers, arranged in the direction of 0°/90°, and two sheets of aluminum with a thickness of 0.4 mm, were investigated. Composites of various stacking configurations of alloy layers, made of one type of aluminum alloy (so-called ‘homogeneous composites’), and two different alloys (mixed composites), were analyzed. The properties of the composites were evaluated with the use of the mixing rule and compared with the test results. The influence of the used aluminum alloys on mechanical properties of GLARE-type composites has been determined. GLARE-type composite made of 7075 alloy sheets had the most favorable mechanical properties in comparison to properties of composites with 2024 and 6061 sheets. It has been shown how the properties of GLARE-type composites depend on the type of the aluminum alloy. It has been also proved that the properties of GLARE-type composites can be evaluated with the use of the mixing rule.