Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends

Abstract

Abstract Acrylonitrile-butadiene-styrene (ABS) grafted copolymer prepared by emulsion polymerization was used to modify different molecular weight poly (vinyl chloride) (PVC) resins. The effects of the molecular weight of the PVC resins on dynamic mechanical analyses (DMA) of PVC/ABS blends and matrix plasticizing behavior on the impact mechanical properties and the morphology were investigated. The tan δ peaks of PVC/ABS blends occurred at the same temperature obtained by DMA, indicating that miscibility of PVC/ABS blends was independent of the molecular weight of PVC. The notched Izod impact test results indicated that the amount of polybutadiene (PB) rubber needed for the brittle-ductile transition (BDT) increases together with the molecular weight of PVC when milled at 165°C. Increasing the operation temperature and adding the plasticizer dioctyl phthalate (DOP) could change the matrix plasticizing extent and the BDT. At a milling temperature of 165°C, the BDT was reached only with 3.6 wt% PB when DOP was added, in contrast to the addition of 7.2 wt% PB in the absence of DOP. The morphology of different plasticized degree of PVC/ABS blends was studied by transmission electron microscopy (TEM) showing that the PVC-1/ABS blends milled at 165°C showed a larger unstained area than the other series of PVC blends.