Affiliation:
1. Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University , Chengdu 610031 , Sichuan , China
Abstract
Abstract
In this article, we prepared novel basalt fiber (BF)-reinforced polypropylene (PP) composites based on the synergistic reinforcement of cellulose nanocrystals (CNCs). First, we compared the enhancement effect of CNCs and silane coupling agent-modified BFs on PP, showing that the enhancement effect of the former was more significant. Subsequently, to further improve the mechanical properties of the composites, CNCs were introduced into the BF-reinforced PP composite system as the third phase, and the results suggested that their combination with BFs could synergistically strengthen the PP matrix composites. Simultaneously, the study also shows that when the mass percentage of CNCs and BFs are 1 and 30%, respectively, the composite achieves the highest mechanical strength, which is 64.31% higher than that of the PP matrix. The systematic characterization revealed the synergistic enhancement mechanism: on the one hand, CNCs not only promoted the improvement of PP crystallinity by heterogeneous nucleation but also formed a wedge-shaped structure between them and BFs through hydrogen bonding to prevent PP molecular movement; on the other hand, the BFs promote not only the extrusion crystallization of the resin matrix but also the network structure formed by the appropriate content of BFs can realize the rapid transmission of external stress.
Subject
Surfaces, Coatings and Films,Process Chemistry and Technology,Energy Engineering and Power Technology,Biomaterials,Medicine (miscellaneous),Biotechnology
Reference46 articles.
1. Liu WF, Cheng L, Li ST. Review of electrical properties for polypropylene based nanocomposite. Compos Commun. 2018;10:221–5.
2. Himma NF, Anisah S, Prasetya N, Wenten IG. Advances in preparation, modification, and application of polypropylene membrane. J Polym Eng. 2016;36:329–62.
3. Liu L, Zhang F, Qi Y, Jian XG, Wang JY. Preparation and properties of high strength and high toughness epoxy resin. Polym Mater Sci Eng. 2019;35:35–9.
4. Li J, Zhang H, Zhang J, Tang Q, Zhou BH, Xu BM, et al. Research progress on the modification of polyamide. N Chem Mater. 2019;47:29–32.
5. Dong Y, Yu T, Wang X, Zhang G, Lu J, Zhang M, et al. Improved interfacial shear strength in polyphenylene sulfide/carbon fiber composites via the carboxylic polyphenylene sulfide sizing agent. Compos Sci Technol. 2020;190:108056.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献