Moisture-dependent orthotropic viscoelastic properties of Chinese fir wood during quenching in the temperature range of 20 to −120°C

Abstract

AbstractAn understanding of wood’s moisture-dependent viscoelastic properties under various temperature conditions is important for assessing its utilization and product quality. In this study, we investigated the influence of moisture content (MC) on the orthotropic viscoelasticity of Chinese fir wood (Cunninghamia lanceolata [Lamb.] Hook.) during quenching ranging from 20 to −120°C. The storage modulus (E′) and loss factor (tan δ) of the longitudinal (L), radial (R) and tangential (T) specimens were determined for nine MC levels ranging from 0.6 to 60.0%. The results showed that E′ generally decreased with increasing amount of bound water in all orthotropic directions, regardless of the temperature. In contrast, a sharp increase in E′ was observed at temperatures below 0°C when free water was present, due to the formation of ice within the cell lumens. The γ-relaxation and β-relaxation were observed in the temperature spectrum. A comparison demonstrates that the β-relaxation showed evident grain orientation. When only bound water was present in the wood cell wall, one clear γ-relaxation was found for all orthotropic directions. In contrast, only the high-temperature side of the γ-relaxation was observed in the three anatomic directions in specimens with free water, which might be related to the amorphous wood cell wall coupling with the frozen free water during the quenching process. In addition, the differences in peak temperatures of the γ-relaxation among the three main directions diminished with increasing bound water.