Study on uniformity of a melt-blown fibrous web based on an image analysis technique-Reference-Cited by-同舟云学术

Study on uniformity of a melt-blown fibrous web based on an image analysis technique

Published:2017-05-01 Issue:3 Volume:17 Page:211-214
ISSN:1618-7229
Container-title:e-Polymers
language:
Short-container-title:

Author:

Sun Guangwu¹²,Sun Xiaoxia¹²,Wang Xinhou¹²

Affiliation:

1. 1College of Textiles, Donghua University, Shanghai, P.R. China

2. 2Key Laboratory of Textile Science and Technology, Ministry of Education, Donghua University, Shanghai, P.R. China

Abstract

AbstractMelt blowing is a one-step process to manufacture products with superfine fibers with diameter <5 μm (and even below 1 μm). As an intermediate product, a melt-blown (MB) web provides a strong influence on the functional properties of the final MB products. In this paper, the influence of processing conditions on the uniformity of a MB web is studied using an image analysis technique, including nominal air jet pressure, polymer volume flow rate, air suction velocity, and the moving speed of the collection belt. This study enables us to quantify the influence of the processing conditions on the uniformity of MB fibrous web.

Publisher

Walter de Gruyter GmbH

Subject

Polymers and Plastics,Physical and Theoretical Chemistry,General Chemical Engineering

Link

https://www.degruyter.com/document/doi/10.1515/epoly-2016-0053/pdf

Reference20 articles.

1. Vibration and stability in the melt blowing process;Ind Eng Chem Res,1993

2. Influence of processing conditions on melt blown web structure: part 3–water Quench;INJ Winter,2005

3. Influence of processing conditions on melt blown web structure: part 3–water Quench;INJ Winter,2005

4. Influence of process conditions on melt blown web structure. Part IV – fiber diameter;J Eng FIBER FABR,2006

5. Nonwoven uniformity identification using wavelet texture analysis and LVQ neural network;Expert Syst Appl,2010

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Synthesis of alumina nanofibers: Role of calcination temperature on dimethyl ether production;Ceramics International;2023-04

2. Overview of the Fiber Dynamics during Melt Blowing;Industrial & Engineering Chemistry Research;2022-01-05

3. Structural design toward functional materials by electrospinning: A review;e-Polymers;2020-11-27

4. Meltblown technology for production of polymeric microfibers/nanofibers: A review;Physics of Fluids;2019-09

5. Measurement of the Uniformity of Thermally Bonded Points in Polypropylene Spunbonded Non-Wovens Using Image Processing and its Relationship With Their Tensile Properties;Autex Research Journal;2018-12-01