Preparation of highly water-resistant wood adhesives using ECH as a crosslinking agent

Abstract

Abstract In this study, kraft lignin and epichlorohydrin (ECH) were used to prepare no-formaldehyde wood adhesives. The lignin was first treated by ball milling, then reacted with glyoxal to produce glyoxalated lignin under alkaline conditions, and then blended with ECH to prepare lignin-based formaldehyde-free adhesive. The influence of the content of ECH on the physicochemical properties of the adhesives was explored, and the possible synthesis mechanism of the ECH-modified glyoxalated lignin adhesives (glyoxalated kraft lignin-epoxy [GKLE]) was investigated. The results show that ECH was beneficial to improving the plywood shear strength and water resistance; the plywood prepared with GKLE-50 adhesive displays comparable water resistance as phenol–formaldehyde resins and its wet shear strength (type I) was 1.05 MPa, exceeding the Chinese National Standards GB/T 9846-2015. Scanning electron microscopy analysis showed that the increase of ECH content promoted the adhesive to penetrate the wood to form glue nails, improving the wet shear strength of the plywood. Chemical analysis indicated that glyoxalation was used to introduce hydroxyethyl groups into the ortho positions of the aromatic rings of lignin, and then the ring-opening reaction between glyoxalated lignin and ECH occurred forming ether bonds. Overall, lignin has displayed great potential in replacing formaldehyde-based adhesives for industrial applications.