Shaping of thermal protective properties of basalt fabric-based composites by direct surface modification using magnetron sputtering technique

Abstract

Abstract A direct modification of the surface of the basalt fabric was carried out by using magnetron sputtering to obtain composites intended for effective protection against contact and radiant heat. One-layer composite with a coating of aluminum (Al) and zirconium dioxide (ZrO2), two-layer composite with a coating of Al/ZrO2, and two-layer composite with a coating of Al/(ZrO2 + titanium dioxide [TiO2]) were deposited on the fabric surface. Scanning electron microscopy with energy-dispersive X-ray spectroscopy analysis was used to assess the coating on basalt fabrics and determine their chemical composition. Parameters such as thermal conductivity coefficient, resistance to radiant heat, and resistance to contact heat for a contact temperature of 250°C were determined for assessment of the composites from the point of view of protective properties. The similarity analysis of composites was performed to state the impact of coating components’ content and coating thickness on chosen parameters. It was found that a two-layer composite in which the outer layer is Al and the inner layer is a mixture of ZrO2 and TiO2 provides good thermal insulation properties. The composites capable of protecting against contact heat at the first efficiency level and against radiant heat at the second efficiency level were obtained.