Effect of friction time on tensile strength and metallurgical properties of friction welded dissimilar aluminum alloy joints

Abstract

Abstract Dissimilar (AA6061 & AA7075-T6) friction welded aluminum joints were taken into the investigation to correlate the influences of friction time on tensile and metallurgical properties. The dissimilar metals were welded by varying the friction time from 2 s to 6 s with the following constant parameters: a rotating speed of 1200 rpm, friction pressure of 35 MPa, upset pressure of 35 MPa, and upset time of 3 s. The higher friction time during joint fabrication needs to be selected to attain good metallurgical bonding between rubbing surfaces. The highest tensile strength of 228 MPa was attained when the friction time was given as 4 s. Furthermore, the increase in friction time widened the width and reduced the hardness of the heat affected zone on the AA6061 side where joint failure occurred. Finally, the metallurgical features of the dissimilar specimens were characterized using optical microscopy, scanning electron microscopy, and X-ray diffraction. Other details related to the characterization and results of the testing were recounted.