Abstract
Abstract
AA5754Al alloy is widely used in industry. However, as in the case of all Al alloys, the 5xxx series Al alloys cannot be easily joined through fusion welding techniques. To address this problem, in this study, the effect of double-sided friction stir welding at various tool rotational speeds (450, 710, and 900 rpm), feeding rates (40, 50, and 80 mm × min-1), and tool tilt angles (0°, 1°, 2°) on the welding parameters and mechanical and microstructural characteristics of AA5754 Al alloy was determined. Tensile strength tests and microhardness tests were performed to examine the mechanical properties of the welded specimens. The microstructures of the welded zone were examined by obtaining optical microscopy and scanning electron microscopy images. The tensile test results indicated that the specimens exhibited the highest welding performance of 95.17 % at a tool rotational speed, feed rate, and tool tilt angle of 450 rpm, 50 mm × min-1 and 1°, respectively.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference41 articles.
1. H. G. Johansen: Structural Aluminium Materials, TALAT Lecture 2202 (1994), pp. 1-28
2. W. D. Callister jr: Material Sciences and Engineering: An Introduction, John Wiley and Sons, New York, USA (2007)
3. L. A. De Filippis, L. M. Serio, D. Palumbo, R. De Finis, U. Galietti: Optimization and characterization of the friction stir welded sheets of AA 5754-H111: Monitoring of the quality of joints with thermographic techniques, Materials 10 (2017), pp. 1165-1200 DOI:10.3390/ma10101165
4. T. Taavitsainen, P. Vilaça, T. Mutanen:Production by FSW of free-shape hollow box profile in AA5754 for automotive application, Welding in the World 60 (2016), pp. 1121-1131 DOI:10.1007/s40194-016-0382-0
5. D. Ren, F.Zeng, Y. Liu, L. Liu, Z. He: Friction stir welding of 5754 aluminum alloy with cover sheet, Materials 12 (2019), pp. 1765-1783 DOI:10.3390/ma12111765
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献