Tribological and adhesion properties of microwave-assisted borided AISI 316L steel

Abstract

Abstract In this study, AISI 316L stainless steel alloy samples were borided with powder-pack boriding method using Ekabor II powder with the support of a microwave furnace with a power of 2.9 KW and a frequency of 2.45 GHz. Boriding was carried out at 850, 900 and 950 °C temperatures for 2, 4 and 6 h of operation. A distinct diffusion barrier consisting of Fe–Ni–Si elements was detected in borided samples at 950 °C for 4 and 6 h. As a result of the Daimler Benz Rockwell-C adhesion tests, regions with insufficient adhesion strength were detected in these samples. In other samples, adhesion qualities between boride layers and substrate were in the range of HF1–HF3. The lowest specific wear rates were determined as 5.208 (mm3 Nm−1) × 10−6 and 5.210 (mm3 Nm−1) × 10−6 for the samples borided for 6 h at 850 °C and 4 h at 900 °C, respectively. It was determined that the increase in thickness of the brittle FeB compound increased the wear with the three-body abrasive wear mechanism.