Measurement Potential of the Barkhausen Effect for Obtaining Additional Information on the Component Condition in Manufacturing-Reference-Cited by-同舟云学术

Measurement Potential of the Barkhausen Effect for Obtaining Additional Information on the Component Condition in Manufacturing

Published:2021-10-01 Issue:5 Volume:76 Page:370-382
ISSN:1867-2493
Container-title:HTM Journal of Heat Treatment and Materials
language:en
Short-container-title:

Author:

Krause C.¹,Fehrenbach D.¹,Wolf L.¹,Kiesewetter M. T.¹,Radek C.²,Schaudig M.³

Affiliation:

1. Hochschule Furtwangen , Robert-Gerwig-Platz 1, 78120 Furtwangen Germany

2. QASS GmbH , Schöllinger Feld 28, 58300 Wetter (Ruhr) Germany

3. EMAG eldec induction GmbH , Otto-Hahn-Straße 14, 72280 Dornstetten Germany

Abstract

Abstract The measurement of Barkhausen noise is one of the non-destructive testing methods which allows the use within the production line and within the cycle time at a high production volume. The aim of the present study was to answer the question, whether it is possible to extract the informations that the Barkhausen noise includes, concerning work-piece conditions, from the signal characteristic and more important assigning these findings. Therefore, soft machined and heat treated shaft components made of the ferromagnetic material Cf53 (1.1213) were analyzed to find characteristics in the Signal that allow to separate clearly an increase in temperature of the tested area from a change in the microstructure. For this purpose the shafts were analyzed at higher temperatures (up to 80 °C) and after an additional annealing process (to change the microstructure specifically). Both investigated situations (higher temperature and modified microstructure) showed different characteristic in the Barkhausen signal, thus an assigning is possible. Metallographic investigation and hardness measurements has been carried out to support the results.

Publisher

Walter de Gruyter GmbH

Subject

Materials Chemistry,Metals and Alloys,Industrial and Manufacturing Engineering

Link

https://www.degruyter.com/document/doi/10.1515/htm-2021-0014/pdf

Reference32 articles.

1. Psuj, G.; Maciusowicz, M.: Analysis of time-frequency representation of Magnetic Barkhausen noise for the need of damage evaluation of steels. Proc. International Interdisciplinary PhD Workshop (IIPhDW). 09.–12.05.2018, Swinoujście, Poland, IEEE, Red Hook, NY, USA, 2018, pp. 108–110. – ISBN: 978-1-5386-6144-4

2. Heinzel, J.; Jedamski, R.; Epp, J.; Karpuschewski, B.: In-process measurement of Barkhausen noise and resulting productivity increase potential in grinding of case hardened steel. CIRP J. of Manuf. Sci. Technol. 32 (2021), pp. 37–45, DOI:10.1016/ j.cirpj.2020.11.011

3. Roos, E.; Maile, K.; Seidenfuß, M.: Werkstoffkunde für Ingenieure: Grundlagen, Anwendung, Prüfung. 6. Aufl., Springer Vieweg, Wiesbaden, 2017, pp. 135–137. – ISBN: 978-3-662-49532-2

4. Yashan, A.: Über die Wirbelstromprüfung und magnetische Streuflussprüfung mittels GMR-Sensoren. Dissertation, Universität des Saarlandes, 2008

5. Hornbogen, E.; Eggeler, G.; Ewald, W.: Werkstoffe, Aufbau und Eigenschaften von Keramik-, Metall-, Polymer-, und Verbundwerkstoffen. 12. Aufl., Springer Vieweg, Wiesbaden, 2019. – ISBN: 978-3-642-22561-1

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Application of Machine Learning Techniques to Determine Surface Hardness Based on the Barkhausen Effect;HTM Journal of Heat Treatment and Materials;2022-12-01