Impact of fully rotating steel casing bored pile on adjacent tunnels

Abstract

Abstract Based on the theoretical model of a soil plug column, the stress analysis of the soil plug column during the spinning process of steel casing is carried out, and the critical depth of the soil column is determined using the stress and torsional shear ratio of the soil column. The effect of factors such as casing wall thickness, surface load, and steel casing spinning speed on the critical depth of soil columns has been explored, and more reasonable construction process parameters have been obtained quantitatively. Combined with the construction of small net distance test piles at a distance of 2.5 m from the tunnel, the impact of the construction process on the existing shield tunnel has been explored. The results indicate that during the construction process, when the wall thickness of the steel casing does not exceed 0.012 m, the surface load does not exceed 15 kPa, the spinning speed of the steel casing is maintained at 5/4/2/4 m/h or 5/3/2/3 m/h (corresponding to soil depths of 2.5/9.5/6/14 m), and the soil height of the soil column is controlled within 11 m, it is not easy to generate soil plug inside the steel casing, and the soil column has strong torsional shear resistance. According to the measured data of adjacent tunnels, it has been found that the construction method of fully rotating steel casing bored pile can effectively reduce the impact on adjacent shield tunnels, and has a good microdisturbance effect, which can control tunnel deformation not exceeding 1 mm and maintain within the warning value range.