Mechanical properties of seawater volcanic scoria aggregate concrete-filled circular GFRP and stainless steel tubes under axial compression

Abstract

Abstract In this study, the properties of seawater volcanic scoria aggregate concrete (SVAC)-filled circular stainless steel (SFCST) and glass fibre-reinforced plastic (GFRP) tubes (SFCGT) were investigated. Ten groups were considered and 30 specimens were prepared, including four different parameters: the concrete type (SVAC and ordinary concrete [OC]), outer tube type (GFRP and stainless steel tubes), concrete strength (C30 and C40), and tube thickness (0, 3, and 4 mm). The typical influences of the SVAC and outer tube on the mechanical properties of specimens were then analysed. The research findings show that the strength and ductility of the SFCGT and SFCST are significantly higher than those of plain SVAC. The peak strain and strength enhancement factor of the SFCGT and SFCST increase with an increase in the tube thickness, and the concrete strength has a detrimental impact on the toughness of the specimen. Unlike in the confined OC specimens, a sudden decrease is observed in the stress–strain curves of the SFCGT and SFCST owing to the changes in the deformability of the SVAC. Generally, the strengths of the SFCGT and SFCST specimens are 10.3% lower and 4.1% higher than those of the confined OC specimens, respectively. Finally, analytical models of the strength and stress–strain curves considering the influences of the SVAC and passive confinement were established, and numerical simulations were performed to provide a basis for the practical application of the SFCGT and SFCST.