Affiliation:
1. Harran University , Mechanical Engineering Department , Şanlıurfa , Turkey
2. Isparta University of Applied Sciences , Mechanical Engineering Department , Isparta , Turkey
3. Ondokuz Mayıs University , Machinery and Metal Technology , Samsun , Turkey
Abstract
Abstract
In this study, Hardox 450 and HiTuf steels were boronized by pack-boriding method at 800, 900, and 1000∘C for 5 h. The phases, microstructure, hardness, and wear behavior of boride layers formed on the surface of samples were investigated using XRD, SEM, Micro-Vickers hardness testers, and a pin-on-disc tribotester, respectively. XRD analysis showed that both FeB and Fe2B phases were formed in the borided area of Hardox 450 steel, but only Fe2B phase occurred in the boride layer of the HiTuf steel. Micro-Vickers hardness results indicated that the hardness values of the boride layer decreased from the column-shaped structure to towards the matrix in both of Hardox 450 and HiTuf steels. Furthermore, the wear test results showed the coefficients of friction (COF) decreased significantly in the borided samples. The COF of the unborided Hardox 450 steel was reduced considerably from 0.29 to 0.02 by boriding treatment. Similarly, the COF of unborided HiTuf steel was significantly diminished from 0.16 to 0.04 by boriding treatment. In conclusion, the results of this study have indicated that the wear resistance of Hardox 450 and HiTuf steels can be improved by pack-boriding.
Subject
Condensed Matter Physics,General Materials Science
Reference40 articles.
1. [1] Adamiak, M., J. Górka, and T. Kik. Comparison of abrasion resistance of selected constructional materials. The Journal of Achievements in Materials and Manufacturing Engineering. Vol. 37, No. 2, 2009, pp. 375–380.
2. [2] Mindivan, H. Effects of Combined Diffusion Treatments on the Wear Behaviour of Hardox 400 Steel. Procedia Engineering, Vol. 68, 2013, pp. 710–715.
3. [3] Günen, A. Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Vol. 51, No. 2, 2020, pp. 927–939.
4. [4] Günen, A., S. Bayar, and M. S. Karakaş. Effect of Different Arc Welding Processes on the Metallurgical and Mechanical Properties of Ramor 500 Armor Steel. Journal of Engineering Materials and Technology, Vol. 142, No. 2, 2020, p. 011010.
5. [5] Ulutan, M., O. N. Celik, H. Gasan, and U. Er. Effect of Different Surface Treatment Methods on the Friction and Wear Behavior of AISI 4140 Steel. Journal of Materials Science and Technology, Vol. 26, No. 3, 2010, pp. 251–257.
Cited by
29 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献