Effect of progressive deinking and reprinting on inkjet-printed paper
Author:
Sonmez Sinan12ORCID, Sood Swati1, Li Kecheng1, Salam Abdus1, Fleming Paul D.1, Pekarovicova Alexandra1ORCID, Wu Qingliu1
Affiliation:
1. Department of Chemical and Paper Engineering, College of Engineering and Applied Science , 4175 Western Michigan University , Kalamazoo , MI , USA 2. Department of Printing Technologies, Faculty of Applied Sciences , Marmara University , Istanbul , , Turkiye
Abstract
Abstract
The main aim of the present research is to examine the effect of progressive deinking and reprinting on the paper properties of inkjet-printed paper. A typical office copy paper was selected as the base paper and printed using an inkjet printer having at least 50 % ink coverage. Thereafter, it was deinked and reprinted thrice, and its paper properties were measured. The paper properties that were measured were roughness, porosity, opacity, brightness, specular gloss, whiteness, bursting strength, tearing resistance, tensile strength, contact angle, deinkability efficiency, visible dirt area, ink elimination factors, and color differences. The results showed that in comparison to the base paper, the progressively deinked and reprinted paper samples showed an increase in roughness, porosity, opacity, tearing resistance, dirt area, and color difference. On the other hand, there was a decrease in brightness, gloss, whiteness, burst strength, tensile strength, contact angle, deinkability efficiency, and ink elimination factors. The experiment shows that the progressively deinked and reprinted papers can be compared to the base paper in the major paper properties.
Funder
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
Publisher
Walter de Gruyter GmbH
Subject
General Materials Science,Forestry
Reference59 articles.
1. Adstamongkonkul, P. (2011). Contact angle. http://soft-matter.seas.harvard.edu/index.php/Contact_angle. 2. Akbarpour, I., Ghaffari, M., Ghasemian, A. (2013) Deinking of different furnishes of recycled MOW, ONP, and OMG pulps in silicate-free conditions using organic complex of PHASS. BioResources 8(1):31–44. https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_08_1_0031_Akbarpour_Deinking_Furnishes_Pulps_PHASS. 3. Aksoy, B., Joyce, M.K., Fleming, P.D. (2003) Comparative study of brightness/whiteness using various analytical methods on coated papers containing colorants. In: TAPPI Spring Technical Conf. & Trade Fair, Chicago, USA. 4. Baral, A.K., Sharma, K. (2014) Effect of paper properties in machine direction & cross direction. Int. J. Sci., Eng. Comput. Technol. 4(3/4):74–77. 5. Blechschmidt, J., Heinemann, S., Putz, H.J., Laufmann, M., Kogler, W., Gliese, T., Auhorn, W.J. (2006). Raw Materials for Paper and Board Manufacture. In: Handbook of Paper and Board, pp. 20–61. ISBN: 9783527309979.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|