Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

Abstract

Abstract In the present work different approaches to improve the mechanical properties of a resistance spot welded 1200 MPa transformation induced plasticity-aided bainitic ferrite steel are evaluated. An extension of the welding time results in coarsening of the microstructure of the outer fusion zone and the maximum force derived by the cross tension strength test did not improve significantly. A temper pulse after a long cooling time leads to pronounced softening of the fusion zone, as determined by hardness mapping, which resulted in enhanced weld properties. A recrystallization pulse modifies the shape of the prior austenite grains at the outer fusion zone, which was visualized with electron backscatter diffraction. This also resulted in a significant improvement of maximum force. For all approaches the failure mode improved, which can be attributed to an increased fraction of high angle grain boundaries at the edge of the fusion zone.