Experimental study of the phase relations of the Fe–Pt–Ho ternary system at 500 °C
Author:
Peng Ling12, Zhou YiFan1, Xu Bo1, Gao XinQiang12ORCID, Gu Zheng-Fei2, Xu Cheng-Fu23
Affiliation:
1. Ganjiang Innovation Academy, Chinese Academy of Sciences , Ganzhou 341119 , P.R. China 2. School of Material Science and Engineering, Guilin University of Electronic Technology , Guilin 541004 , P.R. China 3. School of Mechanical Engineering, Guilin University of Aerospace Technology , Guilin 541004 , P. R. China
Abstract
Abstract
The phase relations of the Fe–Pt–Ho ternary system at 500 °C have been studied by using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy techniques. The Ho3Pt4 phase is stable at 500 °C, and the introduction of Fe does not cause the Ho3Pt4 phase to be decomposed into the two neighbouring phases HoPt and HoPt2. The single phase ranges of α-Fe, Fe3Pt, FePt, FePt3 and Pt in Fe–Pt binary system are from 0 to 10 at.% Pt, 14 to 32 at.% Pt, 33 to 63 at.% Pt, 66 to 78 at.% Pt, and 82 to 100 at.% Pt, respectively. The highest solid solubility of Ho in the α-Fe, Fe3Pt, FePt, FePt3 and (Pt, Fe) phases is less than 1.5 at.% Ho, 2 at.% Ho, 2 at.% Ho, 1.5 at.% Ho and 1.5 at.% Ho, respectively. The isothermal section at 500 °C of the Fe–Pt–Ho ternary alloy phase diagram has been constructed, which consists of 19 single-phase regions, 35 two-phase regions and 17 three-phase regions. No new ternary compounds were found.
Funder
National Natural Science Foundation of China
Publisher
Walter de Gruyter GmbH
Subject
Materials Chemistry,Metals and Alloys,Physical and Theoretical Chemistry,Condensed Matter Physics
Reference34 articles.
1. Weller, D., Parker, G., Mosendz, O., Champion, E., Stipe, B., Wang, X., Klemmer, T., Ju, G., Ajan, A. A HAMR media technology roadmap to an areal density of 4 Tb/in2. IEEE Trans. Magn. 2014, 50, 1–8. https://doi.org/10.1109/TMAG.2013.2281027. 2. Weller, D., Parker, G., Mosendz, O., Lyberatos, A., Mitin, D., Safonova, N. Y., Albrecht, M. Review article: FePt heat assisted magnetic recording media. J. Vac. Sci. Technol. 2016, B34, 060801. https://doi.org/10.1116/1.4965980. 3. Hono, K., Takahashi, Y. K., Ju, G., Thiele, J.-U., Ajan, A., Yang, X., Ruiz, R., Wan, L. Heat-assisted magnetic recording media materials. MRS Bull. 2018, 43, 93–99. https://doi.org/10.1557/mrs.2018.5. 4. Chiou, J.-Y., Chang, H. W., Chi, C.-C., Hsiao, C.-H., Ouyang, C. L100 FePt films with optimal (001) texture on amorphous SiO2/Si substrates for highdensity perpendicular magnetic recording media. ACS Appl. Nano Mater. 2019, 2, 5663–5673. https://doi.org/10.1021/acsanm.9b01192. 5. Papusoi, C., Le, T., Jubert, P.-O., Oswald, D., Ozdol, B., Tripathy, D., Dorsey, P., Desai, M. L10 FePt films with high TC capping layer for heat assisted magnetic recording (HAMR). J. Magn. Magn. Mater. 2019, 483, 249–265. https://doi.org/10.1016/j.jmmm.2019.03.076.
|
|