Light-induced modulation of viscoelastic properties in azobenzene polymers
Author:
Chiodini Stefano1, Borbone Fabio2, Oscurato Stefano L.13, Garcia Pablo D.4, Ambrosio Antonio1ORCID
Affiliation:
1. Center for Nano Science and Technology , Fondazione Istituto Italiano di Tecnologia , Via Rubattino 81, 20134 , Milan , Italy 2. Department of Chemical Sciences , University of Naples “Federico II”, Via Cinthia Complesso Universitario di Monte Sant’Angelo , Via Cintia, 80126 Naples , Italy 3. Physics Department “E. Pancini” , University of Naples “Federico II”, Via Cinthia Complesso Universitario di Monte Sant’Angelo , Via Cintia, 80126 Naples , Italy 4. BYM-Ingema, Centro de Empresas del Caudal , Polígono Vega de Arriba, 33600 , Mieres , Spain
Abstract
Abstract
Photo-induced isomerization of azobenzene molecules drives mass migrations in azopolymer samples. The resulting macroscopic directional photo-deformation of the material morphology has found many applications in literature, although the fundamental mechanisms behind this mass transfer are still under debate. Hence, it is of paramount importance to find quantitative observables that could drive the community toward a better understanding of this phenomenon. In this regard, azopolymer mechanical properties have been intensively studied, but the lack of a nanoscale technique capable of quantitative viscoelastic measurements has delayed the progress in the field. Here, we use bimodal atomic force microscopy (AFM) as a powerful technique for nanomechanical characterizations of azopolymers. With this multifrequency AFM approach, we map the azopolymer local elasticity and viscosity, with high resolution, after irradiation. We find that, while in the (previously) illuminated region, a general photo-softening is measured; locally, the Young modulus and the viscosity depend upon the inner structuring of the illuminating light spot. We then propose a possible interpretation based on a light-induced expansion plus a local alignment of the polymer chains (directional hole-burning effect), which explains the experimental observations. The possibility to access, in a reliable and quantitative way, both Young modulus and viscosity could trigger new theoretical–numerical investigations on the azopolymer mass migration dynamics since, as we show, both parameters can be considered measurable. Furthermore, our results provide a route for engineering the nanomechanical properties of azopolymers, which could find interesting applications in cell mechanobiology research.
Funder
European Research Council Fondazione Cariplo
Publisher
Walter de Gruyter GmbH
Subject
Electrical and Electronic Engineering,Atomic and Molecular Physics, and Optics,Electronic, Optical and Magnetic Materials,Biotechnology
Reference75 articles.
1. A. Priimagi, et al.., “Halogen bonding versus hydrogen bonding in driving self-assembly and performance of light-responsive supramolecular polymers,” Adv. Funct. Mater., vol. 22, no. 12, pp. 2572–2579, 2012. https://doi.org/10.1002/adfm.201200135. 2. F. Borbone, et al.., “Enhanced photoinduced mass migration in supramolecular azopolymers by H-bond driven positional constraint,” J. Mater. Chem. C, vol. 9, no. 34, pp. 11368–11375, 2021. https://doi.org/10.1039/d1tc02266k. 3. S. L. Oscurato, M. Salvatore, P. Maddalena, and A. Ambrosio, “From nanoscopic to macroscopic photo-driven motion in azobenzene-containing materials,” Nanophotonics, vol. 7, no. 8, pp. 1387–1422, 2018. https://doi.org/10.1515/nanoph-2018-0040. 4. P. Rochon, E. Batalla, and A. Natansohn, “Optically induced surface gratings on azoaromatic polymer films,” Appl. Phys. Lett., vol. 66, no. 2, pp. 136–138, 1995. https://doi.org/10.1063/1.113541. 5. D. Y. Kim, S. K. Tripathy, L. Li, and J. Kumar, “Laser‐induced holographic surface relief gratings on nonlinear optical polymer films,” Appl. Phys. Lett., vol. 66, no. 10, pp. 1166–1168, 1995. https://doi.org/10.1063/1.113845.
|
|