Affiliation:
1. Physics , Korea University , Seoul , Korea
Abstract
Abstract
A broadband absorber that utilizes a dispersive metamaterial and covers the entire microwave X-band (8–12 GHz) is proposed in the present study. An ideal absorber attached to the surface of a perfect electric conductor requires the permittivity of the absorbing layer to be anomalously dispersive in the targeted broad frequency band. We show that anomalous dispersion of the permittivity for the X-band can be fitted to a two-pole Lorentz oscillator model and realized with the use of a double-layered, square-loop metamaterial. We explain the connection between the two-pole oscillator model and the double-layered, square-loop metamaterial using an equivalent circuit model and present explicit design rules for the metamaterial. We fabricate a 4-mm-thick metamaterial absorber with flexible silicon rubber, a resistor element, and conductive wire using carbon and silver conductive ink. Our metamaterial absorber achieves a reflectance of less than −20 dB over the entire X-band region.
Funder
Samsung Research Funding & Incubation Center of Samsung Electronics
Subject
Electrical and Electronic Engineering,Atomic and Molecular Physics, and Optics,Electronic, Optical and Magnetic Materials,Biotechnology
Reference19 articles.
1. Y. W. Nam, J. H. Choi, W. J. Lee, and C. G. Kim, “Fabrication of a thin and lightweight microwave absorber containing Ni-coated glass fibers by electroless plating,” Compos. Sci. Technol., vol. 145, pp. 165–172, 2017. https://doi.org/10.1016/j.compscitech.2017.04.009.
2. Y. W. Nam, J. H. Choi, W. J. Lee, and C. G. Kim, “Thin and lightweight radar-absorbing structure containing glass fabriccoated with silver by sputtering,” Compos. Struct., vol. 160, pp. 1171–1177, 2017. https://doi.org/10.1016/j.compstruct.2016.11.014.
3. M. Murugan and V. K. Kokate, “Reflection co-efficient of multilayer microwave absorbers in X-band,” in 2008 10th International Conference on Electromagnetic Interference & Compatibility, 2008, pp. 473–478.
4. S. Padhy, A. De, R. R. Debata, and R. S. Meena, “Design, characterization, and optimization of a multilayer U-type hexaferrite-based broadband microwave absorber,” IEEE Trans. Electromagn. Compat., vol. 60, no. 6, pp. 1734–1742, 2018. https://doi.org/10.1109/TEMC.2018.2805364.
5. T. Liu and S. S. Kim, “Design of wide-bandwidth electromagnetic wave absorbers using the inductance and capacitance of a square loop-frequency selective surface calculated from an equivalent circuit model,” Opt. Commun., vol. 359, pp. 372–377, 2016. https://doi.org/10.1016/j.optcom.2015.10.011.
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献