Influence of pre-deformation on fatigue life of high strength steels by means of micromagnetic Barkhausen noise-Reference-Cited by-同舟云学术

Influence of pre-deformation on fatigue life of high strength steels by means of micromagnetic Barkhausen noise

Published:2023-04-21 Issue:5 Volume:65 Page:641-651
ISSN:0025-5300
Container-title:Materials Testing
language:en
Short-container-title:

Author:

Sarafraz Yashar¹^ORCID,Brink Malte¹,Baak Nikolas¹^ORCID,Koch Alexander¹^ORCID,Walther Frank¹^ORCID

Affiliation:

1. Chair of Materials Test Engineering , TU Dortmund University , Baroper Str. 303, Dortmund D - 44227 , Germany

Abstract

Abstract The micromagnetic Barkhausen noise as a nondestructive testing method was employed in this work to analyze the fatigue behavior of high-strength steels by subjecting them to multi-stage load increase fatigue tests. The micromagnetic Barkhausen noise energy (MBNEnergy) was measured during fatigue tests and coupled with digital image correlation to evaluate the effect of static and cyclic stress as well as local surface strain on MBNEnergy. The test samples were prepared from the forged bainite 18MnCrMoV6 and two ferrite-pearlite 38MnVS6 and 46MnVS5 steels. A part of the specimens was pre-strained before cyclic loading to analyze the effect of pre-deformation on cyclic strength considering measured MBNEnergy. A significant increase in MBNEnergy was observed by increasing the cyclic load on 18MnCrMoV6 specimens with bainite phases while this increase of MBNEnergy was not significant or was not changed for ferrite-pearlite steels 38MnVS6 and 46MnVS5.

Funder

Forschungsvereinigung Stahlanwendung

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://www.degruyter.com/document/doi/10.1515/mt-2022-0425/pdf

Reference15 articles.

1. D. Radaj and M. Vormwald, Ermuedungsfestigkeit: Grundlagen für Ingenieure, 3rd ed., Berlin, New York, Springer, 2007.

2. M. Neslušan, P. Minárik, M. Čilliková, K. Kolařík, and K. Rubešová, “Barkhausen noise emission in tool steel X210Cr12 after semi-solid processing,” Mater. Charact., vol. 157, 2019, Art. no. 109891. https://doi.org/10.1016/j.matchar.2019.109891.

3. S. Santa-aho, A. Sorsa, M. Honkanen, and M. Vippola, “Detailed Barkhausen noise and microscopy characterization of Jominy end-quench test sample of CF53 steel,” J. Mater. Sci., vol. 55, no. 11, pp. 4896–4909, 2020. https://10.1007/s10853-019-04284-z.

4. B. Nahak, “Material characterization using Barkhausen noise analysis technique - a review,” Indian J. Sci. Technol., vol. 10, no. 14, pp. 1–10, 2017. https://10.17485/ijst/2017/v10i14/109697.

5. N. Seemuang and T. Slatter, “Using Barkhausen noise to measure coating depth of coated high-speed steel,” Int. J. Adv. Des. Manuf. Technol., vol. 92, nos. 1–4, pp. 247–258, 2017. https://10.1007/s00170-017-0120-9.