Combination of Digital Image Correlation (DIC) and in situ 3D-μ-CT in the analysis of the relationship between strains and porosity under creep loading-Reference-Cited by-同舟云学术

Combination of Digital Image Correlation (DIC) and in situ 3D-μ-CT in the analysis of the relationship between strains and porosity under creep loading

Published:2023-01-30 Issue:2 Volume:60 Page:93-107
ISSN:2195-8599
Container-title:Practical Metallography
language:en
Short-container-title:

Author:

Camin B.¹,Hornig-Klamroth J.²,zu Bentheim N.²

Affiliation:

1. Hochschule Bremerhaven, Fachbereich 1 – Technologien, Fachgebiet Werkstofftechnik , An der Karlstadt 8, 27568 Bremerhaven Germany

2. Berliner Hochschule für Technik, Fachbereich VIII , Luxemburger Straße 10, 13353 Berlin Germany

Abstract

Abstract In situ 3D μ-XCT allows the time and space resolved measurement and analysis of material damage in the component volume, whereas the Digital Image Correlation (DIC) is a 2D method for the analysis of deformation measured on the surfaces of components. In situ 3D μ-XCT measurements were performed on cylindrical specimen made of SiC particle reinforced titanium MMC (MMC: Metal Matrix Composite) (15 % SiC particles) during creep load. The formation and evolution of voids were subsequently analyzed. Due to the rotationally symmetric sample geometry, the analysis of the deformation in the interior of the material by DIC using 2D slices is possible and evident. The dot pattern required to calculate the strain using DIC (speckle pattern) is provided by the intrinsic particle reinforcement of the MMCs. Temporally and locally changing and time-variant strain fields in both the tensile as well as the compressive range could be detected correlating with void formation and development area.

Publisher

Walter de Gruyter GmbH

Subject

Metals and Alloys,Mechanics of Materials,Condensed Matter Physics,Electronic, Optical and Magnetic Materials

Link

https://www.degruyter.com/document/doi/10.1515/pm-2023-0008/pdf

Reference26 articles.

1. Baruchel, J.: X-ray tomography in material science; Hermes Science: Paris, 2000, ISBN: 2-7462-0115-1.

2. Ludwig, W.; Buffière, J.-Y.; Savelli, S.; Cloetens, P.: Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography. Acta Materialia 51 (2003), pp. 585–598. DOI: 10.1016/S1359-6454(02)00320-8.

3. Buffiere, J. Y.; Ferrie, E.; Proudhon, H.; Ludwig, W.: Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography. Materials Science and Technology 22 (2006), pp. 1019–1024. DOI: 10.1179/174328406X114135.

4. Cloetens, P.; Ludwig, W.; Baruchel, J.; van Dyck, D.; van Landuyt, J.; Guigay, J. P.; Schlenker, M.: Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays. Appl. Phys. Lett. 75 (1999), pp. 2912–2914. DOI: 10.1063/1.125225.

5. Ludwig, W.; King, A.; Herbig, M.; Reischig, P.; Marrow, J.; Babout, L.; Lauridsen, E. M.; Proudhon, H.; Buffière, J. Y.: Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques. JOM 62 (2010), pp. 22–28. DOI: 10.1007/s11837-010-0176-6.