Author:
Snow Dusty,Khademibami Laya,Sherrington Alan,Shmulsky Rubin,Montague Iris,Ross Robert J.,Wang Xiping
Abstract
Abstract
The effect of thermomechanical densification treatment on the abrasion resistance of five hardwood species were investigated in this study. The species tested include ash (Fraxinus sp.), hickory (Carya sp.), red oak (Quercus sp.), sweetgum (Liquidambar styraciflua), and white oak (Quercus sp.). The abrasion test was performed according to the American Society of Testing and Materials standards. Ten specimens from each species were initially tested for abrasion resistance, and those specimens were then put through a thermomechanical densification process. The densification process consisted of bringing the heated platen up to a temperature of 176°C (350°F) on one surface and pressing the specimens at 6.9 MPa (1,000 Psi) for a period of 5 minutes. The densified specimens were then subject to the same abrasion testing procedure. All data were statistically analyzed by two-way analysis of variance (ANOVA) with the procedure of general linear mixed models. The results of this study indicated that densified hickory had the highest abrasion resistance among the five hardwood species tested.
Subject
Plant Science,General Materials Science,Forestry
Reference19 articles.
1. American Society of Testing and Materials (ASTM).
2017.
Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring. ASTM D2394-17.
ASTM International,
West Conshohocken, Pennsylvania.
11pp.
2. Arruda,
L. M.
and
Del Menezzi.C. H. S.
2013.
Effect of thermomechanical treatment on physical properties of wood veneers.
Int. J. Wood Wood Prod.
4(4):
217–
224.
3. Aytin,
A.,
Korkut,
S.
As,
N.
Ünsal,
Ö.
and
Günduz.G.
2015.
Effect of heat treatment of wild cherry wood on abrasion resistance and withdrawal capacity of screws.
Drvna Ind.
66(4):
297–
303.
4. Brožek,
M.
2017.
Abrasive wear resistance of selected woods.
Res. Agric. Eng.
63(2):
91–
97.
https://doi.org/10.17221/74/2015-RAE
5. Candan,
Z.,
Gonultas,
O.
Gorgun,
H. V.
and
Unsal.O.
2021.
Examining parameters of surface quality performance of paulownia wood materials modified by thermal compression technique.
Drvna Ind.
72(3):
231–
236
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献