1. Measurement of PM2.5and PM10by Dilution Sampling (Constant Sampling Rate Procedures). Report CTM-039; U.S. Environmental Protection Agency: Research Triangle Park, NC, 2003.
2. England, G.C. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil- and Gas-Fired Combustion Systems. Report No. 04-05; New York Energy Research and Development Authority:Albany, NY, 2004.
3. Chang, M.C.; England, G.C. Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas-Fired Combustion Systems, Update: Critical Review of Source Sampling and Particulate Source Emission Profiles. Prepared for U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA; Gas Research Institute: Des Plains, IL; American Petroleum Institute: Washington, DC, 2004.
4. Dilution Test Method for Determining PM2.5and PM10Mass in Stack Gases;Proposed Method D22.03-W1752; American Society for Testing and Materials; West Conshohocken, PA, 2005.
5. Chang, M.C.O.; England, G.C.Development of Fine Particulate Emission Factors and Speciation Profiles for Oil and Gas-Fired Combustion Systems;Other Report: Pilot Scale Dilution Sampler Design and Validation Tests (Laboratory Study). Unpublished Report prepared for the U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh,PA; The Gas Research Institute: Des Plains, IL; and the American Petroleum Institute: Washington, DC, 2004.