Development of Emission Factors for Polypropylene Processing-Reference-Cited by-同舟云学术

Development of Emission Factors for Polypropylene Processing

Published:1999-01 Issue:1 Volume:49 Page:49-56
ISSN:1096-2247
Container-title:Journal of the Air & Waste Management Association
language:en
Short-container-title:Journal of the Air & Waste Management Association

Author:

Adams Ken¹,Bankston John²,Barlow Anthony³,Holdren Michael W.⁴,Meyer Jeff⁵,Marchesani Vince J.⁶

Affiliation:

1. a The Society of the Plastics Industry, Inc. , Washington , District of Columbia , USA

2. b Aristech Chemical Corporation , Pittsburgh , Pennsylvania , USA

3. c Quantum Chemical Company , Cincinnati , Ohio , USA

4. d Battelle , Columbus , Ohio , USA

5. e Amoco Polymers, Inc. , Alpharetta , Georgia , USA

6. f Montell North America, Inc. , Wilmington , Delaware , USA

Publisher

Informa UK Limited

Subject

Management, Monitoring, Policy and Law,Waste Management and Disposal

Link

https://www.tandfonline.com/doi/pdf/10.1080/10473289.1999.10463782

Reference6 articles.

1. Battelle Final Report to the Society of the Plastics Industry, “Sampling and analysis of emissions evolved during thermal processing of ethylene-vinyl acetate and ethylene methyl acrylate resin composites,” March 1995.

2. Hughes, T.W.; Boland, R.F.; Rinaldi, G.M. Source Assessment: Plastic Processing, State of the Art. Monsanto Research Corporation. March 1978, EPA-600/2-78/004C, 27–28.

3. “Air facility subsystem source classification codes and emission factor listing for criteria air pollutants,” EPA, March 1990, EPA 450/490/003.

4. Compendium of Methods For The Determination of Toxic Organic Compounds in Ambient Air, U.S. Environmental Protection Agency, June 1988. Available from NTIS as PB90–127374.

5. Fed. Regist. 1994, 59, 189, 49,877.

Cited by 37 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Characterization and elimination efficiency of volatile organic compounds in mechanically recycled polyethylene terephthalate at various recycling stages;Waste Management;2024-06

2. Investigating environmentally persistent free radicals (EPFRs) emissions of 3D printing process;Chemical Engineering Journal;2024-01

3. Characterization of odors and volatile organic compounds changes to recycled high-density polyethylene through mechanical recycling;Polymer Degradation and Stability;2023-02

4. Improvement in mechanical properties of recycled polypropylene composite by controlling the length distribution of glass fibers;Polymer Composites;2021-02-05

5. Controls for University Fabrication Laboratories—Best Practices for Health and Safety;ACS Chemical Health & Safety;2020-12-28