The effects of processing parameters on mechanical properties of 3D-printed polyhydroxyalkanoates parts-Reference-Cited by-同舟云学术

The effects of processing parameters on mechanical properties of 3D-printed polyhydroxyalkanoates parts

Published:2023-01-13 Issue:1 Volume:18 Page:
ISSN:1745-2759
Container-title:Virtual and Physical Prototyping
language:en
Short-container-title:Virtual and Physical Prototyping

Author:

Ivorra-Martinez Juan¹^ORCID,Peydro Miguel Ángel¹^ORCID,Gomez-Caturla Jaume¹^ORCID,Sanchez-Nacher Lourdes¹,Boronat Teodomiro¹^ORCID,Balart Rafael¹^ORCID

Affiliation:

1. Institute of Materials Technology (ITM), Universitat Politècnica de València (UPV), Alcoy, Spain

Funder

MCIN/AEI/10

Generalitat Valenciana

Spanish Ministry of Science, Innovation

Publisher

Informa UK Limited

Subject

Industrial and Manufacturing Engineering,Computer Graphics and Computer-Aided Design,Modeling and Simulation,Signal Processing

Link

https://www.tandfonline.com/doi/pdf/10.1080/17452759.2022.2164734

Reference66 articles.

1. Experimental Optimization of Fused Deposition Modelling Processing Parameters: A Design-for-Manufacturing Approach

2. The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling

3. Microbial production of polyhydroxyalkanoates (PHAs) and its copolymers: A review of recent advancements

4. The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimens

5. A Comparison of the physical properties of two commercial 3D printing PLA grades

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Enhancing Polylactic Acid Properties with Graphene Nanoplatelets and Carbon Black Nanoparticles: A Study of the Electrical and Mechanical Characterization of 3D-Printed and Injection-Molded Samples;Polymers;2024-08-29

2. Surface Erosion Equations for Degradation Analysis of Several Common Three-Dimensional Shapes of Plastic Materials;Journal of Polymers and the Environment;2024-06-14

3. Warpage detection in 3D printing of polymer parts: a deep learning approach;Journal of Intelligent Manufacturing;2024-05-09

4. Commercial Grade of P(3HB‐co‐3HHX) Final Properties Adjustment by the Modification of Cooling Conditions in the Injection Molding and Ageing Process;Macromolecular Materials and Engineering;2024-03-07

5. Multifunctional 3D Printed Thermoplastic Biopolyesters;Reference Module in Materials Science and Materials Engineering;2024