The role of overlap region width in multi-laser powder bed fusion of Hastelloy X superalloy-Reference-Cited by-同舟云学术

The role of overlap region width in multi-laser powder bed fusion of Hastelloy X superalloy

Published:2022-11-11 Issue:1 Volume:18 Page:
ISSN:1745-2759
Container-title:Virtual and Physical Prototyping
language:en
Short-container-title:Virtual and Physical Prototyping

Author:

Xie Yin¹,Teng Qing¹,Shen Muyu¹,Zhang Zhenyu¹,Wei Yu¹,Cai Chao¹,Wei Qingsong¹

Affiliation:

1. State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Technology, Huazhong University of Science and Technology, Wuhan, People’s Republic of China

Funder

National Natural Science Foundation of China

China Postdoctoral Science Foundation

Huazhong University of Science and Technology

Wuhan Science and Technology Project

Hubei Provincial Department of Science and Technology 2020 Provincial Key R&D Plan

Publisher

Informa UK Limited

Subject

Industrial and Manufacturing Engineering,Computer Graphics and Computer-Aided Design,Modeling and Simulation,Signal Processing

Link

https://www.tandfonline.com/doi/pdf/10.1080/17452759.2022.2142802

Reference61 articles.

1. Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy

2. Additively manufactured oxide dispersion strengthened nickel-based superalloy with superior high temperature properties

3. Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance

4. A novel approach to direct preparation of complete lath martensite microstructure in tool steel by selective laser melting

5. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Advancements in micromachining of additive manufactured materials: a comprehensive review;Materials and Manufacturing Processes;2024-06-10

2. Prediction of the inter-track bonding during the dual-laser powder bed fusion;Journal of Manufacturing Processes;2024-06

3. A Review on Effect of Cooling Rate on Metallurgical, Mechanical, Geometrical Characteristics and Defects of Laser Cladding Process;Lasers in Manufacturing and Materials Processing;2024-05-06

4. Review of defects and their sources in as-built Ti6Al4V manufactured via powder bed fusion;The International Journal of Advanced Manufacturing Technology;2024-04-20

5. An integrated multiscale simulation guiding the processing optimisation for additively manufactured nickel-based superalloys;Virtual and Physical Prototyping;2024-02-08