Topology optimisation of self-supporting structures based on the multi-directional additive manufacturing technique-Reference-Cited by-同舟云学术

Topology optimisation of self-supporting structures based on the multi-directional additive manufacturing technique

Published:2023-11 Issue:1 Volume:18 Page:
ISSN:1745-2759
Container-title:Virtual and Physical Prototyping
language:en
Short-container-title:Virtual and Physical Prototyping

Author:

Ye Jun¹²³,Guo Qichen¹²,Lu Hongjia⁴,Kyvelou Pinelopi⁵,Zhao Yang¹,Gardner Leroy⁵,Xie Yi Min⁴

Affiliation:

1. College of Civil Engineering and Architecture, Zhejiang University, Hangzhou, People's Republic of China

2. Centre for Balance Architecture, Zhejiang University, Hangzhou, People's Republic of China

3. School of Civil Engineering, University of Leeds, Leeds, UK

4. Centre for Innovative Structures and Materials, School of Engineering, RMIT University, Melbourne, Australia

5. Department of Civil and Environmental Engineering, Imperial College London, London, UK

Funder

National Natural Science Foundation of China

the Natural Science Foundation of Zhejiang Province

the Centre for Balance Architecture of Zhejiang University and the Australian Research Council

Publisher

Informa UK Limited

Subject

Industrial and Manufacturing Engineering,Computer Graphics and Computer-Aided Design,Modeling and Simulation,Signal Processing

Link

https://www.tandfonline.com/doi/pdf/10.1080/17452759.2023.2271458

Reference48 articles.

1. Efficient topology optimization in MATLAB using 88 lines of code

2. Generating optimal topologies in structural design using a homogenization method

3. Bendsøe MP, Sigmund O. Topology optimization: “theory, methods, and applications”. Springer; 2011. https://link.springer.com/book/10.1007978-3-662-05086-6

4. A 99 line topology optimization code written in Matlab

5. Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Topology Optimization of Self-supporting Structures for Additive Manufacturing via Implicit B-spline Representations;Computer-Aided Design;2024-10

2. Achieving self-supported enclosed voids and machinable support structures in topology optimization for additive manufacturing;Structural and Multidisciplinary Optimization;2024-08

3. Transforming construction? Evaluation of the state of structural 3D concrete printing in research and practice;Construction and Building Materials;2024-08

4. Test and analysis of the interfacial bond behaviour of circular concrete-filled wire-arc additively manufactured steel tubes;Journal of Building Engineering;2024-04

5. Layout and geometry optimization design for 3D printing of self-supporting structures;Structures;2024-01