Rapid alloy prototyping for strip steel development: DP800 steel case study-Reference-Cited by-同舟云学术

Rapid alloy prototyping for strip steel development: DP800 steel case study

Published:2021-02-21 Issue:5 Volume:48 Page:493-504
ISSN:0301-9233
Container-title:Ironmaking & Steelmaking
language:en
Short-container-title:Ironmaking & Steelmaking

Author:

Zhu Y.¹,Slater C.¹^ORCID,Connolly S.¹,Farrugia D.²,Davis C.¹

Affiliation:

1. Warwick Manufacturing Group (WMG), University of Warwick, Coventry, England

2. Rolling Finishing & Measurement Department, Tata Steel Europe, London, UK

Funder

Engineering and Physical Sciences Research Council

Publisher

Informa UK Limited

Subject

Materials Chemistry,Metals and Alloys,Mechanical Engineering,Mechanics of Materials

Link

https://www.tandfonline.com/doi/pdf/10.1080/03019233.2021.1880036

Reference16 articles.

1. Dual-phase steels**Every effort has been made to trace copyright holders and to obtain their permission for the use of copyright material. The publisher apologizes for any errors or omissions in the acknowledgements printed in this book and would be grateful if notified of any corrections that should be incorporated in future reprints or editions.

2. A novel route for development of ultrahigh strength dual phase steels

3. Rapid alloy prototyping: Compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn–1.2C–xAl triplex steels

4. Innovations, Q. Materials design. [cited 2020 07].

5. Lavery NP, Mehraban S, Pleydell-Pearce C, et al. Ironmaking & steelmaking processes, products and applications combinatorial development and high throughput materials characterisation of steels combinatorial development and high throughput materials characterisation of steels.

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Investigating the sensitivity of dual-phase steel microstructure to continuous annealing line parameters;Ironmaking & Steelmaking: Processes, Products and Applications;2024-05-30

2. Development of a High Ductility DP Steel Using a Segregation Neutralization Approach: Benchmarked Against a Commercial Dual Phase Steel;Metallurgical and Materials Transactions A;2024-05-20

3. Use of miniaturized tensile specimens to evaluate the ductility and formability of dual phased steels for Rapid Alloy Prototyping;Materials Science and Engineering: A;2023-06

4. Development of Desirable Fine Ferrite Grain Size and Random Second Phase Dual-Phase Steel Microstructures Using Composition and/or Processing Modifications;Metals;2022-07-07

5. Segregation Neutralised Steels: Microstructural Banding Elimination from Dual-Phase Steel Through Alloy Design Accounting for Inherent Segregation;Metallurgical and Materials Transactions A;2022-04-11