Rapid Quenching of Molten Salts as an Approach for the Coordination Characterization of Corrosion Products-Reference-Cited by-同舟云学术

Rapid Quenching of Molten Salts as an Approach for the Coordination Characterization of Corrosion Products

Published:2023-05-15 Issue:3 Volume:198 Page:727-734
ISSN:0029-5639
Container-title:Nuclear Science and Engineering
language:en
Short-container-title:Nuclear Science and Engineering

Author:

Lehmusto Juho¹^ORCID,Kurley J. Matthew²^ORCID,Cakmak Ercan³^ORCID,Keiser James R.³^ORCID,Lindberg Daniel⁴^ORCID,Engblom Markus¹^ORCID,Pint Bruce A.³^ORCID,Raiman Stephen S.⁵^ORCID

Affiliation:

1. Abo Akademi University, Faculty of Science and Engineering, Turku, Finland

2. Oak Ridge National Laboratory, Nuclear Energy and Fuel Cycle Division, Oak Ridge, Tennessee

3. Oak Ridge National Laboratory, Materials Science and Technology Division, Oak Ridge, Tennessee

4. Aalto University, Department of Chemical and Metallurgical Engineering, Espoo, Finland

5. University of Michigan, Nuclear Engineering & Radiological Sciences, Ann Arbor, Michigan

Funder

Laboratory Directed Research and Development Program of Oak Ridge National Laboratory

Publisher

Informa UK Limited

Subject

Nuclear Energy and Engineering

Link

https://www.tandfonline.com/doi/pdf/10.1080/00295639.2023.2204175

Reference29 articles.

1. The molten salt reactor (MSR) in generation IV: Overview and perspectives

2. Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies

3. Screening of high melting point phase change materials (PCM) in solar thermal concentrating technology based on CLFR

4. A. FERRARA, R. HASLETT, and J. JOYCE, “Molten Salt Thermal Energy Storage for Utility Peaking Loads,” Proc. 12th Intersociety Energy Conversion Engineering Conference, 1977, p. 547.

5. Compatibility of structural materials with molten chloride mixture at high temperature