Using a non-linear mixed model behavior of CZM to predict the damage in single lap bonded joint with Bi-composite graded materials-Reference-Cited by-同舟云学术

Using a non-linear mixed model behavior of CZM to predict the damage in single lap bonded joint with Bi-composite graded materials

Published:2023-08-12 Issue: Volume: Page:1-15
ISSN:1537-6494
Container-title:Mechanics of Advanced Materials and Structures
language:en
Short-container-title:Mechanics of Advanced Materials and Structures

Author:

Abdelouahed Elamine¹^ORCID,Mokhtari Mohamed²^ORCID,Habib Benzaama¹,Ghermaoui Ilias-Mohammed-Amine²^ORCID,Ezzine Mohammed-Chams-Eddine²^ORCID,Ghomari Achwak²,Merasli Youcef²

Affiliation:

1. LABAB Laboratory, Mechanical engineering, National Polytechnic School of Oran Maurice Audin, Oran, Algeria

2. LaRTFM Laboratory, Mechanical engineering, National Polytechnic School of Oran Maurice Audin, Oran, Algeria

Publisher

Informa UK Limited

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science,General Mathematics,Civil and Structural Engineering

Link

https://www.tandfonline.com/doi/pdf/10.1080/15376494.2023.2243604

Reference34 articles.

1. Comparative Failure Assessment of Single and Double Lap Joints with Varying Adhesive Systems

2. A Rate Independent Cohesive Zone Model for Modeling Failure in Quasi-Brittle Materials

3. Micromechanical investigation of cross-ply carbon composite laminates with glass microtubes using CZM and XFEM

4. Numerical simulation of delamination growth in fiber reinforced polymer laminates using cohesive zone modeling

5. Rate-Dependent Cohesive Zone Modeling of Unstable Crack Growth in an Epoxy Adhesive

Cited by 12 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Elastoplastic limit analysis of functionally graded materials pipe elbows to predict the damage under in-plane bending moment using XFEM-Technic;Mechanics Based Design of Structures and Machines;2024-09-12

2. The interfacial behavior of a liquid crystal elastomer film bonded to an orthotropic substrate under light illumination;Mechanics of Advanced Materials and Structures;2024-09-03

3. FGM concept used in damage analysis of heat-treated elbows under out-of-plane combined bending moment;Mechanics Based Design of Structures and Machines;2024-08-29

4. Damage investigation in steel pipe under pressure and combined bending moment: Application in structure connected by elbow and reduced tee;Mechanics Based Design of Structures and Machines;2024-08-23

5. Novel FGM-USDFLD approach in Graded Cohesive Zone Modeling (GCZM): Predicting debonding and crack propagation in composite-patched notched plates;Mechanics of Advanced Materials and Structures;2024-08-14