Selected previous findings on the factors influencing the gluing quality of solid wood products in timber construction and possible developments: A review-Reference-Cited by-同舟云学术

Selected previous findings on the factors influencing the gluing quality of solid wood products in timber construction and possible developments: A review

Published:2021-05-12 Issue: Volume: Page:1-12
ISSN:1748-0272
Container-title:Wood Material Science & Engineering
language:en
Short-container-title:Wood Material Science & Engineering

Author:

Hänsel Andreas¹,Sandak Jakub²³,Sandak Anna²⁴,Mai Juana¹,Niemz Peter⁵⁶

Affiliation:

1. Department of Wood and Wood-Based Materials, Saxon University of Cooperative Education, Dresden, Germany

2. InnoRenew CoE, Izola, Slovenia

3. Andrej Marušič Institute, University of Primorska, Koper, Slovenia

4. Faculty of Mathematics, Natural Sciences, and Information Technology, University of Primorska, Koper, Slovenia

5. Eidgenössische Technische Hochschule (ETH) Zürich, Zürich, Switzerland

6. Luleå University of Technology, Wood Science and Engineering, Skellefteå, Sweden

Funder

Horizon 2020 Framework Programme

Slovenian Research Agency

Publisher

Informa UK Limited

Subject

General Materials Science

Link

https://www.tandfonline.com/doi/pdf/10.1080/17480272.2021.1925963

Reference82 articles.

1. Bondline shear strength and wood failure of European and tropical hardwood glulams

2. Ammann, S. (2015) Mechanical Performance of Glue Joints in Structural Hardwood Elements. Thesis (PhD). Eidgenössische Technische Hochschule, Zürich.

3. Quality assessment of glued ash wood for construction engineering

4. Moisture induced stresses perpendicular to the grain in glulam: Review and evaluation of the relative importance of models and parameters

Cited by 32 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections;Engineering Structures;2024-09

2. Achieving sustainable and highly efficient wood bonding through synergistic plant root-driven penetration mode with a hyperactive interface;Chemical Engineering Journal;2024-07

3. Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles;European Journal of Wood and Wood Products;2024-05-27

4. Effect of Primer and Fibre Orientation on Softwood–Hardwood Bonding;Journal of Composites Science;2024-05-21

5. Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections;Engineering Structures;2024-03