Use of X-ray computed tomography for real-time studies of the fire progress in wood-Reference-Cited by-同舟云学术

Use of X-ray computed tomography for real-time studies of the fire progress in wood

Published:2023-11-02 Issue:6 Volume:18 Page:2150-2152
ISSN:1748-0272
Container-title:Wood Material Science & Engineering
language:en
Short-container-title:Wood Material Science & Engineering

Author:

Couceiro José¹^ORCID,Lin Chia-feng¹^ORCID,Hansson Lars¹^ORCID,Schleicher Frank¹,Svensson Mikael¹,Jones Dennis¹^ORCID,Mantanis George I.²^ORCID,Sandberg Dick¹^ORCID

Affiliation:

1. Wood Science and Engineering, Luleå University of Technology, Skellefteå, Sweden

2. Laboratory of Wood Science and Technology, Department of Forestry, Wood Sciences and Design, University of Thessaly, Karditsa, Greece

Funder

CT WOOD

Publisher

Informa UK Limited

Subject

General Materials Science

Link

https://www.tandfonline.com/doi/pdf/10.1080/17480272.2023.2269539

Reference7 articles.

1. Couceiro, J., et al., 2017. CT scanning of capillary phenomena in bio-based materials. In: L. Gurau, M. Campean, and M. Ispas, ed. Proceedings of the International Conference Wood Science and Engineering in the Third Millennium (ICWSE 2017). Brasov, Romania, Transilvania University of Brasov. 229–235.

2. The use of CT-scanning technology in wood value-chain research and in wood industry - a state of the art;Fredriksson M.;ProLigno,2017

3. CT-scanning during heat treatment of wood;Hansson L.;Pro Ligno,2011

4. X-ray computed tomography for the detection of damage in Scots pine trunks caused by blister-rust fungus Cronartium pini (Willd.)

5. Lindgren O. 1983. Medical CT-scanners for non-destructive wood density and moisture content measurements. Dissertation (PhD). University of Technology.