Determination of the machining characteristics of Uludağ fir (<i>Abies nordmanniana</i>Mattf.) densified by compressing-Reference-Cited by-同舟云学术

Determination of the machining characteristics of Uludağ fir (Abies nordmannianaMattf.) densified by compressing

Published:2022-05-30 Issue: Volume: Page:1-11
ISSN:1748-0272
Container-title:Wood Material Science & Engineering
language:en
Short-container-title:Wood Material Science & Engineering

Author:

Sofuoglu Sait Dundar¹^ORCID,Tosun Mustafa²^ORCID,Atılgan Abdi³^ORCID

Affiliation:

1. Simav Technology Faculty, Department of Wood Works Industrial Engineering, Kutahya Dumlupinar University, Simav/Kutahya, Turkey

2. Institute of Graduate Education, Kutahya Dumlupinar University, Kutahya, Turkey

3. Department of Design, Afyon Kocatepe University, Afyon Vocational School, Afyon, Turkey

Publisher

Informa UK Limited

Subject

General Materials Science

Link

https://www.tandfonline.com/doi/pdf/10.1080/17480272.2022.2080586

Reference101 articles.

1. Ábrahám, J. and Németh, R. (2012) Physical and mechanical properties of thermo-mechanically densified poplar. In Proceedings of the International Scientific Conference on Sustainable Development and Ecological Foorprint, 26–27 March 2012, Sopron, Hungary.

2. Ábrahám, J., Németh, R. and Molnár, S. (2010) Thermo-mechanical densification of Pannónia Poplar. In Proceedings of the Quality Control for Wood and Wood Products, COST Action E53, 4–7 May 2010, Edinburgh, UK.

3. Densification, screw holding strength, and Brinell hardness of European beech and poplar oriented strand boards

4. Surface wettability and roughness of 11 Amazonian tropical hardwoods

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effect of heat and steam on color and brightness in cylindrical densification of black poplar (Populus nigra L.) wood;Mobilya ve Ahşap Malzeme Araştırmaları Dergisi;2023-12-29

2. Termo–mekanik yoğunlaştırma işleminin ahşap malzemenin fiziksel özellikleri üzerine etkisi;Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi;2023-10-15

3. Use of Spinning Roller in Cylindrical Densification; Spring back in Black Poplar, Larch and Cedar of Lebanon after Densification;Bilge International Journal of Science and Technology Research;2023-09-30

4. Use of spinning roller in cylindrical densification; change in hardness, brightness, and surface roughness in solid wood (Larch) after densification;Mobilya ve Ahşap Malzeme Araştırmaları Dergisi;2023-06-30

5. Određivanje svojstava obradivosti toplinski modificiranog drva sibirskog bora (Pinus sibirica);Drvna industrija;2023-06-20